Installation manual

Page 44
Software Version
This control displays the radio software version. No change is possible.
To display Software Version:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Software version and press
Select.
3. Software version is displayed the version
may differ from the version displayed in your
radio.
4. Press OK to return to standby screen.
Position Indication
This controls whether the position information is displayed on-screen
(Display On/Off), and sets the format of the display (Enhanced position).
Enhanced position displays position in degrees, minutes and seconds.
To change the settings of this feature:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Position indication and press
Select.
3. Scroll between the options Display On/Off
and Enhanced position. When the desired
option appears press Select.
4. Scroll between On and Off states for
Display On/Off or Enhanced position. When
the desired state is shown press Select.
The enhanced position is displayed only when
the Pos button is pressed in standby screen.
When enabled, it is also sent with a Distress
message.
Profiles
Software version 
Select Back
Software version
McM Fixed VHF
1.0
OK Back
Profiles
Position indication
Select Back
Position indication
Display on/off 
Select Back
Enhanced position
On 
Select Back
Display on/off
On 
Select Back
Lat: 50°56'23"N
Long: 001°34'51"E
Pos at:08:44 UTC
Exit