Installation manual

Page 24
ADJUSTING THE DISPLAY
LCD setup day & night modes
To enter LCD setup mode, press and hold the illumination key for 3 seconds the LCD
LCD LCD
LCD
setup: Day mode
setup: Day mode setup: Day mode
setup: Day mode
page will be displayed.
Use the left and right ( and ) keys to adjust the LCD contrast.
Use the up and down ( and ) keys to adjust the LCD brightness.
To change the night mode settings, briefly press the illumination key. The
LCD
LCDLCD
LCD setup: night mode
setup: night modesetup: night mode
setup: night mode page will be displayed.
Note: These settings are non-volatile and will be unchanged after a power cycle.