Installation manual

Page 35
Installation of the tri-channel NAVTEX antenna
Metal, rigging or other antennae must not be located in the 'NO GO cone' surrounding
the upper part.
Use the mounting bracket supplied; an alternative mounting kit may be purchased if
the mounting arrangement is unsuitable for your installation.
Attach the clamping brackets to the antenna mounting adapter and use the clamping
arrangement to fix to a suitable vertical tube.
Important
NAVTEX antennas must be mounted clear of obstructions and at least
0.5 metres away from other antennas.
Where practical avoid locating the NAVTEX antenna close to MF / HF
transmitting antennas or VHF / AIS antennas.
Ensure that antennas cannot be snagged by mooring warps or running
rigging or engulfed by green water.
Antennas should always be mounted vertically in an elevated position.