User manual

Page 13
7.2 NAVTEX Mode, Print View§
Allows individual messages to be printed. The ‘Print View’ is only displayed if the
manual print setting is enabled on the [Setup Mode⇒
⇒⇒
⇒NAVTEX View⇒
⇒⇒
⇒Options Page].
Printing is only possible if an external printer or PC is installed as part of the system.
The NEXT NEW softkey can be used to move the next new message to the top of the
NAVTEX display where pressing PRINT will print it.
7.3 NAVTEX Mode, Sort View
From within this view different sort criteria can be applied to change the order of the
messages on the display. The NAVTEX Mode display can be sorted in one of three
ways by pressing the CRITERIA softkey:
Sort by Station
Sort by Type
Sort by Date
The sort can be further organised in ascending or descending order by pressing the
ORDER softkey.
Sort by Station
Sorts by station name.
Ascending sort is 490 stations A to Z , then 518 stations A to Z.
Messages are ordered by message category A to Z.
Descending sort is 518 stations Z to A, then 490 stations Z to A.
Messages are ordered by message category Z to A.
Sort by Type
Sorts by message category.
Ascending sort is 490 message categories A to Z before 518 message
category A to Z.
Descending sort is 518 message categories Z to A before 490 message
category Z to A.
Sort by Date
Sorts by time and date of message reception.
Descending sort puts the newest message at the top of the display.
Ascending sort puts the oldest message at the top of the display.
For sort by date to work properly, the correct time and date should be set using either
time data from the NMEA input, or if this is not available, time should be entered
manually at start-up.
The scroll bar at the right edge of the display indicates how far you have progressed
through the filtered and sorted messages.
The total height of the scroll bar represents the total number of messages available for
viewing with the current filter settings.