User manual

Page 39
Power
Voltage range: 10.8 V to 15.6 V
Consumption (Typical)
Standby 125 mA (1.5 W at 12 V)
Printing 210 mA (2.5 W at 12 V)
Printer Unit
Operating Temperature Range: 0 to +40° C
Storage Temperature Range: -20 to +55° C
Humidity: 0 to 95%
Mounting: Below decks
Weight (without cable): 1200 g (approx.)
Printer Specification
Type: Thermal, 40 chars per line
Character Matrix: 7 x 5
Paper Roll: 80 mm wide x 20 m long
Paper Out: Audible alarm
Front Panel: Four push-button switches located under paper load door
Controls
Power ON/OFF
Paper feed
Two menu setup keys
Interface Parameters
Serial RS232 compatible, 4800 baud, 8 data bits, 1 stop bit, no parity
Auto Linefeed Selectable (Default: OFF)
Rear Connections 10 way plug in connector
Alarms Paper Out
Low battery supply 9 Vdc
Mounting Shelf/bulkhead
FMT-4 panel mount option