Catalog Fan Coil Units Models: MWM-GW MCM-DW/EW MCK-AW/BW/CW MCC-CW MDB-BW MFCU - 2008
Table of Contents Nomenclature ................................................................................................................. 1 Features ......................................................................................................................... 8 Application Information .................................................................................................. 10 Sound Data ...............................................................................................
Nomenc la tur e Nomencla latur ture Production spec variation Type of ref.
MWM 007GW 010GW 015GW 020GW 025GW 301W Cool/Heat x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Handset Control 2 Left piping Piping Air Filter x x x x x x x x x x x Nano filter x x x x x x x x x x x Ionizer filter Connection x 1/2" BSP Female adaptor x Marking x CE mark G7 Cooling Handset G11 Cooling Handset G11 Heat Pump Handset Valve/Valveless AXAA AXAB AXAA AXAB AXAA AXAB AXAA AXAB AXAA AXAB AXAB PCB - W2_L Nomenclature Model Name Produc
Product Line-Up MCM-DW/CBW/EW Product Line-Up 020DW 025DW 030DW 040DW MCM 050DW 007CBW 010CBW 015CBW 015EW 020EW 025EW AXCC AXCD AXCE AXCF AXCG AXCC AXCD AXCE AXCF AXCG AXCC AXCD AXCE AXCF AXCG AXCC AXCD AXCE AXCF AXCG AXCC AXCD AXCE AXCF AXCG UXBD UXBE UXBD UXBE UXBD UXBE AXAA AXAB AXAA AXAB AXAA AXAB x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
Marking Connection CE mark 3/4" BSP (female) brass union Auto air swing PLCKAW-G7 Cooling PLCKAW-G7 Heat Pump PLCKAW-SLM 3 Heat Pump PLCKAW-Netware 3 PLCKCW-G7 Cooling PLCKCW-G7 Heat Pump PLCKCW-SLM 3 Heat Pump AXBE x x x x x x x x x x 025AW AXBE x x x x x x x x x x 030AW AXBE x x x x x x x x x x 040AW AXBE x x x x x x x x x x 050AW AXBE x x x x x x x x x x 010CW AXAB x x x x x x x x x 015CW AXAB x x x x x x x x x 020CW AXAB x x x x x x x x x 020AWH AXAA x x x x x x x x 025AWH AXAA x x x x x x x
Product Line-Up MCC-CW Product Line-Up 010CW AXBC x x x x x x x x x AXAK x x x x x AXBA AXBC x x x x x x x x x x x x AXAC MCC 020CW x x x AXAK x x x x x AXBA x x x x x x x x x x x x AXAC 025CW x x x AXAK x x x x x AXBA AXBC x x x x x x x x x x x x AXAA 028CW x x x AXAK x x x x x AXBA x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x AXAJ AXBC x x x AXAJ x x
Product Line-Up MCC-CW Product Line-Up 030CW AXBC x x x x x x x x x AXAK x x x x x AXBA AXBC x x x x x x x x x x x x AXAA MCC 040CW x x x AXAK x x x x x AXBA x x x x x x x x x x x x AXAA 050CW x x x AXAK x x x x x AXBA AXBC x x x x x x x x AXAK x x x x x AXBA AXBC x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x AXAJ x x x AXAA 060CW x x x AXAJ x x x AXAJ AXBC x x AXAJ
Product Line-Up MDB-BW Product Line-Up 7
Fea tur es eatur tures Space Saving Different types of fan coil units are designed to be both versatile and space saving to suit every interior design. Ceiling concealed type for the sophisticated, luxurious floor space saving, all kind of interior decoration; ceiling exposed type for economical and space saving installation; etc. Zone Control These fan coil units can be installed in different zones as each unit operates independently.
Unique Features For MCK Series Built In High Head Drain Pump The unit comes with a built in high head drain pump. Condensate water can be pumped up to 700mm and drain out smoothly. 4-way Air Discharge And Air Swing These features greatly improve the air distribution in the conditioned space. Wireless And Wired Controller Option Wireless Handset is the standard controller. However if wired controller required, Netware3 & SLM3 wired controller is a wise choice(optional).
Applica tion Inf or ma tion pplication Infor orma mation General Installation Guide System Configuration The standard controller board (W2) comes with a VALVE jumper and a HEAT jumper.
Model : MWM 020 / 025GW (IONIZER) Model : MCM Series / MCC Series / MCK-AW/CW 11
MCK-AWH 4 pipes system controller board setting A) Model selection The standard controller board (W2.0) comes with a default setting for model selection. Please select the model accordingly by using jumper.
B) Valve, Heat and Fan priority selection Jumper Fan Priority Jumper With Jumper (Default) User set speed or lower fan if auto Without Jumper Fan stop when thermostat cut off Heat Jumper Valve Jumper mode is selected For Heat pump For Valve control (Model 1,2,3 & 4) For cooling only For valveless control (Model 1 & 2) C) Others The controller board comes with other option. i) Unoccupied Mode If the dry contact is closed, the Unoccupied mode is activated and vice versa.
ii) Anti Freeze Mode Anti Freeze operation has the highest priority among all unit operation. Anti Freeze operation will be activated only if dry contact is closed and vice versa. iii) Window Open Mode The dry contact connection points can be connected in parallel with other fan coil unit (FCU) boards. If the dry contact is closed, Window open mode will be activated on all the fan coil units which are connected in parallel as shown in figure below.
Water Piping Connection The indoor unit is equipped with water outlet and inlet bare connection. There is an air-vent for air purging that is fitted at the outlet water header. 3 ways solenoid valve is required for cycling off or bypass the chilled water. Black steel pipe, polyethrene pipe, PVC pipe and copper tube recommended in field installation. All types of piping and connection must be insulated by polyurethane (ARMAFLEX type or equivalent) to avoid condensation.
Preliminary Site Survey Electrical supply and installation is to conform to LOCAL AUTHORITY's (e.g. National Electricity Board) CODES and REGULATIONS. Voltage supply fluctuation must not exceed ± 10% of rated voltage. Electricity supply lines must be independent of welding transformers which can cause supply fluctuation. Ensure that the location is convenient for wiring and piping. Mounting For ceiling mounted models, locate a position where piping and ducting work can be kept to a minimum.
General Operation Guide Start-Up The following procedure must be completed before any attempts is made to put the entire system Into operation: 1) Piping connections completed. 2) Electrical connections completed. 3) Duct connections completed. 4) Auxiliary drain pans in position where required. 5) Drain line draining into drain pans. 6) Filters correctly installed and free of construction debris. 7) Motor-blower assembly rotates freely. 8) Unit Hydro-statically tested and air vented.
Controller Type Of Controller Vs Type Of Fan Coil MODELS STANDARD CONTROLLER OPTIONAL CONTROLLER MWM - GW G11 (Wireless) NETWARE3 / SLM3 (Wired) MWM 301W G7 (Wireless) NETWARE3 / SLM3 (Wired) MCK - AW / AWH / CW G7 (Wireless) NETWARE3 / SLM3 (Wired) MCM - DW / CBW / EW G7 (Wireless) NETWARE3 / SLM3 (Wired) MCC - CW MDB - BW NETWARE3 / SLM3 (Wired) Without Controller Self Diagnosis Table Error Indication Cool LED 7 Segment Display Room Sensor error (short/open) Blinks 1 times E1 Pipe W
Operation Guide For G7 1 2 Transmission source • The source where the signal will be transmitted Signal transmission indication • Blink to confirm the last setting has been send to the unit. 4 Temperature setting • To set the desired • • 3 room temperature, press the button to increase or decrease the set temperature. The temperature setting range is from 16°C to 30°C (Optional setting 18°C to 30°C). Press both buttons simultaneously to toggle the temperature setting between °C and °F.
G11 Remote Controller Temperature Setting On/Off Button x x Press Once to start the air conditioner x Press again to stop the unit To set the desired room temperature, press the button to increase or decrease the set temperature. x The temperature setting range is from 16qC to 30qC x Press both buttons simultaneously to toggle the temperature setting between qC and qF Personalised Setting x Press and hold the button for 3s to initiate personalized setting. x Set the individual setting e.g.
Netware3 Wired Controller 21
22
23
SLM3 WIRED CONTROLLER SLM3 AC5300 1. "ON/OFF" switch x Press to start the air conditioner unit. x Press again to stop the unit. 2. Temperature setting x Set the desired room temperature. x Press button to increase or decrease the set temperature. Setting range are between 16°C to 30°C (60°F to 80°F). 3. Operation Modes x Press the "mode" button for select the type of operating mode. - Cooling Only : COOL, FAN, DRY - Heat Pump : COOL, FAN, DRY, HEAT 6.
INSTALLATION OF LCD REMOTE CONTROLLER STEP-BY-STEP GUIDE i) ii) iii) iv) v) First, open up the casing of the LCD remote controller into its top and bottom case using a screwdriver. To do this, insert the screwdriver into the lower slot and slide it in the outward direction. Fix the bottom case onto the wall with the 2 wooden screws provided. Then, insert the 4 connecting wires (from the main board) through the slot on the lower center of the case as shown below.
Sound Da ta Data Sound Pressure Level Wall Mounted Split Type Model MWM007GW MWM010GW MWM015GW MWM020GW MWM025GW MWM301W Speed HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW Microphone position : 1/1 Octave Sound Pressure Level (dB, ref 20PPa) 125 Hz 32 27 24 28 27 24 30 28 24 37 34 30 41 39 37 42 40 37 250 Hz 34 30 27 34 30 26 35 31 26 44 40 35 48 44 41 46 45 43 500 Hz 38 34 29 37 33 28 39 34 28 42 39 35 47 43 40 45 44 43 1k Hz 37 32 26 36 31 25
Ceiling Cassette Split Type Model MCK020AW / AWH MCK025AW / AWH MCK030AW / AWH MCK040AW / AWH MCK050AW / AWH Microphone position : Model MCK010CW MCK015CW MCK020CW Microphone position : Speed High Medium Low High Medium Low High Medium Low High Medium Low High Medium Low 125Hz 46 44 43 48 45 43 50 48 46 50 48 46 54 52 51 1/1 Octave Sound pressure level (dB, ref 20PPa) 250Hz 500Hz 1kHz 2kHz 4kHz 45 40 38 32 21 43 37 33 28 18 42 35 31 26 17 46 43 39 33 27 43 40 35 29 21 42 38 32 27 19 48 47 43 37
Ceiling Concealed Fan Coil Unit Model MCC010CW MCC015CW MCC020CW MCC025CW MCC028CW MCC030CW MCC038CW MCC040CW MCC050CW MCC060CW Ext.
Selection Pr ocess Process Fan Performance Curves FAN PERFORMANCE CURVE MCC 010CW 29
FAN PERFORMANCE CURVE MCC 015CW 30
FAN PERFORMANCE CURVE MCC 020CW 31
FAN PERFORMANCE CURVE MCC 025CW 32
FAN PERFORMANCE CURVE MCC 028CW 33
FAN PERFORMANCE CURVE MCC 030CW 34
FAN PERFORMANCE CURVE MCC 038CW 35
FAN PERFORMANCE CURVE MCC 040CW 36
FAN PERFORMANCE CURVE MCC 050CW 37
FAN PERFORMANCE CURVE MCC 060CW 38
FAN PERFORMANCE CURVE MDB 075BW 39
FAN PERFORMANCE CURVE MDB 100BW 40
FAN PERFORMANCE CURVE MDB 125BW 41
FAN PERFORMANCE CURVE MDB 150BW 42
Water Flow Vs Pressure Drop Wall Mounted Split Type MODELS MWM007GW MWM010GW MWM015GW MWM020GW MWM025GW MWM301W FLOW RATE LITRES/M USGPM 4.20 1.11 5.60 1.48 7.00 1.85 8.40 2.22 9.80 2.59 4.79 1.27 6.39 1.69 7.99 2.11 9.58 2.53 11.18 2.95 5.40 1.43 7.21 1.90 9.01 2.38 10.81 2.86 12.61 3.33 7.99 2.11 10.66 2.82 13.32 3.52 15.99 4.22 18.65 4.93 8.28 2.19 11.04 2.92 13.80 3.65 16.56 4.38 19.32 5.10 10.45 2.76 13.93 3.68 17.41 4.60 20.89 5.52 24.38 6.44 WATER PRESSURE DROP kPa PSI 15.99 2.32 26.43 3.
Water Flow Vs Pressure Drop Ceiling Exposed Split Type MODELS MCM020DW MCM025DW MCM030DW MCM040DW MCM050DW MCM007CBW MCM010CBW MCM015CBW FLOW RATE LITRES/M USGPM 8.86 2.34 11.81 3.12 14.76 3.90 17.71 4.68 20.67 5.46 9.54 2.52 12.72 3.36 15.90 4.20 19.08 5.04 22.26 5.88 11.13 2.94 14.84 3.92 18.55 4.90 22.26 5.88 25.97 6.86 19.53 5.16 26.04 6.88 32.55 8.60 39.06 10.32 45.57 12.04 21.12 5.58 28.16 7.44 35.20 9.30 42.24 11.16 49.28 13.02 2.95 0.78 3.94 1.04 4.92 1.30 5.90 1.56 6.89 1.82 4.09 1.08 5.
Water Flow Vs Pressure Drop Ceiling Cassette Split Type MODELS MCK020AW MCK025AW MCK030AW MCK040AW MCK050AW FLOW RATE LITRES/M USGPM 12.49 3.30 16.65 4.40 20.82 5.50 24.98 6.60 29.14 7.70 13.17 3.48 17.56 4.64 21.95 5.80 26.34 6.96 30.73 8.12 15.22 4.02 20.29 5.36 25.36 6.70 30.43 8.04 35.50 9.38 16.58 4.38 22.10 5.84 27.63 7.30 33.16 8.76 38.68 10.22 17.03 4.50 22.71 6.00 28.39 7.50 34.07 9.00 39.74 10.50 WATER PRESSURE DROP kPa PSI 6.68 0.970 11.16 1.620 16.74 2.430 23.56 3.420 31.28 4.540 7.34 1.
Water Flow Vs Pressure Drop Ceiling Cassette Split Type MODELS MCK010CW MCK015CW MCK020CW MCK020AWH MCK025AWH MCK030AWH MCK040AWH MCK050AWH FLOW RATE LITRES/M USGPM 4.31 1.14 5.75 1.52 7.19 1.90 8.63 2.28 10.07 2.66 7.61 2.01 10.14 2.68 12.68 3.35 15.22 4.02 17.75 4.69 8.18 2.16 10.90 2.88 13.63 3.60 16.35 4.32 19.08 5.04 9.08 2.40 12.11 3.20 15.14 4.00 18.17 4.80 21.20 5.60 9.77 2.58 13.02 3.44 16.28 4.30 19.53 5.16 22.79 6.02 11.36 3.00 15.14 4.00 18.93 5.00 22.71 6.00 26.50 7.00 12.49 3.30 16.
Water Flow Vs Pressure Drop Ceiling Concealed Split Type MODELS MCC010CW MCC015CW MCC020CW MCC025CW MCC028CW MCC030CW MCC038CW MCC040CW MCC050CW MCC060CW FLOW RATE LITRES/M USGPM 4.54 1.20 6.06 1.60 7.57 2.00 9.08 2.40 10.60 2.80 5.86 1.55 7.81 2.06 9.77 2.58 11.72 3.10 13.67 3.61 9.54 2.52 12.72 3.36 15.90 4.20 19.08 5.04 22.26 5.88 10.67 2.82 14.23 3.76 17.79 4.70 21.35 5.64 24.91 6.58 12.94 3.42 17.26 4.56 21.57 5.70 25.89 6.84 30.20 7.98 14.08 3.72 18.77 4.96 23.47 6.20 28.16 7.44 32.85 8.
Water Flow Vs Pressure Drop Ducted Split Type MODELS MDB075BW MDB100BW MDB125BW MDB150BW FLOW RATE LITRES/M USGPM 37.02 9.78 49.36 13.04 61.70 16.30 74.03 19.56 86.37 22.82 45.42 12.00 60.56 16.00 75.70 20.00 90.84 24.00 105.98 28.00 61.54 16.26 82.06 21.68 102.57 27.10 123.09 32.52 143.60 37.94 79.49 21.00 105.98 28.00 132.48 35.00 158.97 42.00 185.47 49.00 WATER PRESSURE DROP kPa PSI 6.29 0.913 10.54 1.530 15.85 2.300 22.32 3.240 29.70 4.310 5.06 0.735 8.47 1.230 12.68 1.840 17.85 2.590 23.70 3.
Correction Factors Altitude Correction Factors Elevation, m 0 300 600 900 1200 1500 1800 Total Capacity 1.00 0.99 0.98 0.97 0.96 0.94 0.93 Sensible Capacity 1.00 0.96 0.93 0.90 0.86 0.83 0.80 Heating Capacity Correction Factors EAT °C 4.4 7.2 10.0 12.7 15.5 18.3 21.1 23.9 26.7 37.8 0.838 0.771 0.700 0.631 0.562 0.493 0.424 0.354 0.284 43.3 0.980 0.913 0.843 0.773 0.705 0.636 0.567 0.498 0.428 45 1.021 0.954 0.885 0.817 0.748 0.679 0.610 0.541 0.471 48.8 1.122 1.055 0.986 0.918 0.848 0.779 0.711 0.
Engineering and Ph ysical Da ta Physical Data General Data - MWM-GW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MWM-GW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MWM301W 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCK-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-CBW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-CBW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-EW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCM-EW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP. : 70°C (158°F), LEAVING WATER TEMP.
General Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP. : 70°C (158°F), LEAVING WATER TEMP.
General Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP. : 70°C (158°F), LEAVING WATER TEMP.
General Data - MDB-BW 11) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
General Data - MDB-BW 11) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151 & ISO13253. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW : a) COOLING - ENTERING AIR TEMP. : 27°C (80.6°F) DB / 19°C (66.2°F) WB, ENTERING WATER TEMP. : 7°C (44.6°F), LEAVING WATER TEMP. : 12°C (53.6°F) b) HEATING - ENTERING AIR TEMP.: 20°C (68°F) DB, ENTERING WATER TEMP.
Components Data - MWM-GW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MWM301W 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCK-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCM-CBW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCM-EW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Components Data - MDB-BW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
Perf or mance Da ta erfor ormance Data Unit Selection Procedure The cooling and heating capacities of the fan coil units can be determined by the Cooling Capacity Performance Chart and Heating Capacity Performance Chart in the following pages based on nominal air flow at standard water temperature. The total and sensible capacities must be adjusted as variables come in. A sample of selection procedure is given as below: Step 1 Determine type of fan coil units to be used, i.e.
Step 4 If air flow value is different from the nominal value(high speed), then refer to specification from Page 50 to 74 for the air flow required (medium or low speed). Determine the total and sensible correction factor from Air Flow Capacity Correction Factor (Page 49). Step 5 If the unit is to operate at an altitude above sea level, multiply the capacity correction factors by an Altitude Correction Factors. Refer to Page 49.
Step 2 From page 49, the air flow correction factor table, at high speed, the air volume is 1040 CFM and medium speed is 950 CFM, hence high speed is selected. And the correction factor is hence 1.0. If lower air flow required, then use the medium and low fan speed. The correction factor can be determined by getting the ratio of air flow (i.e. medium or low speed / high speed). Step 3 As the unit is operating at 600m above sea level, the Altitude correction factor is 0.98 total and 0.93 sensible.
MWM007GW Cooling Capacity Performance Chart 93
94 MWM010GW
95 MWM015GW
96 MWM020GW
97 MWM025GW
98 MWM301W
99 MCM020DW
100 MCM025DW
101 MCM030DW
102 MCM040DW
103 MCM050DW
104 MCM007CBW
105 MCM010CBW
106 MCM015CBW
107 MCM015EW
108 MCM020EW
109 MCM025EW
110 MCK020AW
111 MCK025AW
112 MCK030AW
113 MCK040AW
114 MCK050AW
115 MCK010CW
116 MCK015CW
117 MCK020CW
118 MCK020AWH
119 MCK025AWH
120 MCK030AWH
121 MCK040AWH
122 MCK050AWH
123 MCC010CW
124 MCC015CW
125 MCC020CW
126 MCC025CW
127 MCC028CW
128 MCC030CW
129 MCC038CW
130 MCC040CW
131 MCC050CW
132 MCC060CW
133 MDB075BW
134 MDB100BW
135 MDB125BW
136 MDB150BW
Heating Capacity Performance Chart Wall Mounted Split Type MWM-GW Ceiling Exposed Split Type MCM-DW 26.0 MCM050DW 24.0 Heating Capacity (kW) 22.0 MCM040DW 20.0 18.0 16.0 MCM030DW 14.0 MCM025DW 12.0 MCM020DW 10.0 8.0 12.0 16.0 20.0 24.0 28.0 32.0 Water Flowrate (L/min) 137 36.0 40.0 44.0 48.
MCM-EW Ceiling Cassette Split Type MCK-AW 21.00 Heating Capacity (kW) MCK050AW MCK040AW 19.00 MCK030AW 17.00 MCK025AW 15.00 MCK020AW 13.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.
Ceiling Cassette Split Type MCK-CW 11.0 Heating Capacity (kW) MCK020CW MCK015CW 9.0 7.0 MCK010CW 5.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 Water Flowrate (L/min) MCK-AWH Heating Capacity (kW) 15.00 MCK050AWH MCK040AWH 13.00 MCK030AWH MCK025AWH 11.00 MCK020AWH 9.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 Water Flow rate - L/m in 139 24.00 26.00 28.00 30.00 32.
Ceiling Concealed Split Type MCC-CW 30.0 MCC038CW Heating Capacity (kW) 25.0 20.0 MCC030CW MCC028CW 15.0 MCC025CW MCC020CW 10.0 MCC015CW MCC010CW 5.0 4 8 12 16 20 24 28 32 36 40 44 48 52 Water Flow rate (L/m in) MCC-CW 34.0 MCC060CW Heating Capacity (kW) 32.0 30.0 28.0 MCC050CW 26.0 24.0 MCC040CW 22.0 20.
Ducted Split Type MDB-BW 100.0 MDB150BW 95.0 90.0 Heating Capacity (kW) 85.0 80.0 MDB125BW 75.0 70.0 65.0 60.0 MDB100BW 55.0 50.0 MDB075BW 45.0 40.
Dimensional Da ta Data Indoor Unit Model : MWM 007GW Dimension in mm Indoor Unit Model : MWM 010 / 015 GW Dimension in mm 142
Indoor Unit Model : MWM 020 / 025GW Indoor Unit Model : MWM 301W Dimension A B C D E MWM301W 1120.0 (44.1) 360.0 (14.2) 200.0 (7.9) 730.0 (28.7) 347.0 (13.
Indoor Unit Model : MCM 020 / 025 DW Dimension in mm Indoor Unit Model : MCM 030 / 040 / 050 DW MODEL MCM030DW MCM040DW MCM050DW A 1174 1674 1674 B 75 75 75 C 1082 1582 1582 D 68 68 68 E 93 93 93 F G 156 1214 156 1714 156 1714 H 57 57 57 I 670 670 670 J 216 216 216 K L M 319 879 517 319 1379 517 319 1379 517 N 100 95 95 O 47 40 40 P 100 100 100 Q 53 45 45 Dimension in mm 144
Indoor Unit Model : MCM 007 / 010 / 015 CBW A (GRILL) B C D E F G H I J K L M N O MCM 007CBW 700 40 36 853 780 680 352 292 235 140 830 250 50 100 120 MCM 010CBW 700 40 36 853 780 680 352 292 235 140 830 250 50 100 120 MCM 015CBW 1050 40 36 1203 1130 680 352 292 235 140 1180 250 50 100 120 MODEL Dimension in mm Indoor Unit Model : MCM 015 / 020 / 025 EW Dimension in mm 145
Indoor Unit Model : MCK 020 / 025 / 030 / 040 / 050 AW Dimension in mm Indoor Unit Model : MCK 010 / 015 / 020 CW Dimension in mm 146
Indoor Unit Model : MCK 020 / 025 / 030 / 040 / 050 AWH Water Inlet/Outlet 1 = connection to chiller Water Inlet/Outlet 2 = connection to boiler Dimension in mm 147
Indoor Unit Model : MCC 010 / 015CW MODEL A B C D E F G H I J K L M N O MCC010CW 31 741 702 662 10 765 72 261 411 349 225 261 171 118 77 MCC015CW 31 881 841 802 10 905 72 261 411 349 225 261 171 118 77 Dimension in mm Indoor Unit Model : MCC 020 / 025 CW MODEL D E F G H I J K L M N O P MCC020CW 31 A 1041 1002 B C 962 10 1065 72 261 411 349 225 261 174 128 55 55 MCC025CW 31 1176 1137 1097 10 1200 72 261 411 349 225
Dimension in mm Indoor Unit Model : MCC 028CW 149
Dimension in mm Indoor Unit Model : MCC 030CW 150
Dimension in mm Indoor Unit Model : MCC 038CW 151
Dimension in mm Indoor Unit Model : MCC 040CW 152
Dimension in mm Indoor Unit Model : MCC 050CW 153
Dimension in mm Indoor Unit Model : MCC 060CW 154
Indoor Unit Model : MDB 075BW Dimension in mm Indoor Unit Model : MDB 100BW Dimension in mm 155
Indoor Unit Model : MDB 125BW (VERTICAL AIR DISCHARGE, RIGHT PIPING) Dimension in mm Indoor Unit Model : MDB 150BW (VERTICAL AIR DISCHARGE, RIGHT PIPING) Dimension in mm 156
Indoor Unit Model : MDB 125BW (VERTICAL AIR DISCHARGE, LEFT PIPING) Dimension in mm Indoor Unit Model : MDB 150BW (VERTICAL AIR DISCHARGE, LEFT PIPING) Dimension in mm 157
Indoor Unit Model : MDB 125BW (HORIZONTAL AIR DISCHARGE, RIGHT PIPING) Dimension in mm Indoor Unit Model : MDB 150BW (HORIZONTAL AIR DISCHARGE, RIGHT PIPING) Dimension in mm 158
Indoor Unit Model : MDB 125BW (HORIZONTAL AIR DISCHARGE, LEFT PIPING) Dimension in mm Indoor Unit Model : MDB 150BW (HORIZONTAL AIR DISCHARGE, LEFT PIPING) Dimension in mm 159
Electrical Da ta Data MWM-GW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151. MCK-AW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.
MCK-AWH 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151. MCK-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.
MCM-DW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151. MCM-CBW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.
MCM-EW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151. MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.
MCC-CW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151. MDB-BW 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE. 2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 5151.
W iring Dia grams Diag Model : MWM 007 / 010 / 015GW Model : MWM 020 / 025 GW 165
Model : MWM 301W 166
Model : MCK 020 / 025 / 030 / 040 / 050AW Model : MCK 010 / 015 / 020CW 167
Model : MCK 020 / 025 / 030 / 040 / 050 AWH 168
Model : MCM 020 / 025 / 030 / 040 / 050DW Model : MCM 007 / 015 CBW 169
Model : MCM 010 CBW Model : MCM 015 / 020 / 025 EW 170
Model : MCC 010 / 015 / 020 / 025CW Model : MCC 028 / 030 / 038 / 040 / 050 / 060CW 171
Model : MDB 075 / 100BW - Without Controller Model : MDB 125 / 150BW - Without Controller 172
Ser vice and Maintenance Service Items Maintenance procedures Period Indoor air filter 1. Remove any dust adhered on the filter by using a vacuum cleaner or wash in lukewarm water At least once every 4 weeks. (below 40°C) with neutral cleaning detergent. 2. Rinse well and dry the filter before placing it back More frequently if necessary. onto the unit. 3. Do not use gasoline, volatile substances or chemical to clean the filter. Indoor unit 1.
Troub leshooting oubleshooting When any malfunction of the air conditioner unit is noted, immediately switch off the power supply to the unit. Check for the following fault conditions and causes for some simple troubleshooting tips. Fault Causes The air conditioner unit does not x Power failure, or the fuse blown and need to be replaced. operate. x The power plug is disconnected. x If the fault persist after all these verifications, please contact the air conditioner unit installer.
Exploded Vie w and P ar ts List iew Par arts Model : MWM 007GW No 1 2 3 4 5 6 7 8 9 10 11 12 Description Assy., Chassis Fan Motor Cross Flow Fan Fan, Bush Assy., Coil Piping Clamp\ Assy., Drain Pan Assy., Drain Hose Assy., Control Box Assy., Control Box Cover Assy. Front Cover Assy.
Model : MWM 010 / 015 GW No Description 1 Assy., Chassis 2 Fan Motor MWM010GW MWM015GW 3 Cross Flow Fan 4 Fan, Bush 5 Assy., Coil 6 Piping Clamp\ 7 Assy., Drain Pan 8 Assy., Drain Hose 9 Assy., Control Box 10 Assy., Control Box Cover 11 Assy. Front Cover 12 Assy.
Model : MWM 020 / 025 GW No Description 1 Assy., Chassis 2 Fan Motor MWM020GW MWM025GW 3 Cross Flow Fan 4 Fan, Bush 5 Assy., Coil 6 Piping, Clamp 7 Assy., Drain Pan 8 Drain Hose 9 Assy., Control Box Parts Not in Diagram 10 Assy., Control Box Cover Part No R50124068170 No 11 12 13 14 15 16 17 18 Description Assy., Front Cover Assy., Air Discharge Housing Louver Bottom Louver Top Saranet Air Filter W2 Control Module Assy.
Model : MWM 0301W No 1 2 3 4 5 6 7 8 9 10 11 Description Assy., Installation Bracket Assy. Chassis Piping Clamp Fan Bush Bracket Cross Flow Fan Fan Bush Bracket Assy. Coil Service Panel Control Module Fan Motor Assy., Front Cover Part No R50014050721 R50124050703 R07014024546 R12014050709 R03029013842 R11019013841 R50024077702 R12014050685 R04084087919 R03034052105 - No 12 13 14 15 16 17 18 19 20 21 22 Description LED Light Bracket G7 Handset Control Box Cover Assy.
Model : MCM 020 / 025 DW No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Description Top Panel Hanger Bracket - Left Control Box Close Up, Side Panel (Left) Side Frame Assy., Left Coil Holder Assy. - Left Fan Deck Air Intake Grille Assy. Front Frame - Left Louver Assy. Front Frame - Right Air Swing Motor Assy. Bottom Panel Drain Pan Assy. Centre Support Bracket Coil Assy. Part No.
Model : MCM 030 DW No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Description Bracket Hanger, Left Control Box Cover W2 control module Close Up, Left Frame, Side Left Assy., Coil Holder Left Fan Deck Coil Assy. Frame, Front Left Assy., Louver Frame, Front Right Air Swing Motor Assy. Air Intake Grille Frame Holder Assy. Bottom Panel Drain Pan Assy. Drain Hose Assy. Grille, Air Intake Part No.
Model : MCM 040 / 050 DW No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Description Bracket Hanger, Left Control Box Cover W2 Control Module Close Up, Left Frame, Side Left Assy., Coil Holder Left Fan Deck Coil Assy. MCM040DW MCM050DW Frame, Front Left Frame Bottom Centre Front Top Centre Air Intake Grille Frame Center Assy. Air Intake Grille Frame Center Assy. Frame, Front Right Assy., Louver Bottom Air Swing Motor Assy. Air Intake Grille Frame Holder Assy. Bottom Panel Drain Pan Assy. Part No.
Model : MCM 015 / 020 / 025 EW No 1 2 3 4 5 6 7 Description Assy., Top Panel Assy., Coil Assy., Vane Assy., Drain Pan Assy., Control Box Cover, Terminal Box Motor MCM015EW MCM020EW MCM025EW 8 Motor, Bracket 9 Blower Wheel 10 Blower Housing 11 Motor, Air Swing 12 Assy.
Model : MCK-AW No Description 1 Base Pan 2 Fan Motor MCK 020A/AR MCK 025A/AR MCK 030A/AR MCK 040A/AR MCK 050A/AR 3 Fan Motor Bush 4 Plain Washer 5 Fan Motor Washer 6 Bottom Coupling 7 Turbo Fan 8 Top Coupling 9 Flat Washer 10 Plain Washer 11 Spring Washer 12 Hexagon Bolt, M8 x 20mm 13 Hexagon Bolt, M8 x 15mm 14 Assy., Coil MCK020AW MCK025AW MCK030/040/050AW 15 Drain Pump Bracket Part No.
Model : MCK-AW Panel No 1 2 3 4 5 6 7 8 9 10 11 12 Description Front Frame Panel Receiver Bracket Discharge Housing A Assy., Louver A Discharge Housing B Assy., Louver B Discharge Housing D Louver Bracket Crank Shaft Crank Connector Crank Cross Swing Motor Part No.
Model : MCK-CW No Description 1 Assy., Base Pan 2 Assy., Casing Side Panel A Side Panel B 3 Assy., Coil MCK 010CW MCK 015/020CW 4 Fan Cover 5 Turbo Fan 6 Plate, Wire 7 Fan Motor MCK010CW MCK015CW MCK020CW 8 Bush, Fan Motor 9 Bush, Fan Motor Ring 10 W2 Control Module 11 Drain Pump 12 Level Switch Part No. R01014053368 R50014057905 R01014053369 R01014053370 No 13 14 15 16 17 18 19 20 21 22 23 24 Description Bush, Wire Bush, Drain Pump Assy., Drain Pump Support Bracket Assy.
Model : MCK-CW Panel No 1 2 3 4 5 6 7 8 9 10 11 12 Description Frame Intake Grille Air Filter Grille Lock Discharge Foam Discharge Foam, LED Discharge Foam, Short Louver Louver, LED Linkage Cover Linkage Cover, Motor Assy., Bracket Receiver Part No.
Model : MCC 010 CW No 1 2 3 4 5 6 7 Description Cabinet Fan Deck Assy., Coil MCC 010CW Primary Drain Pan Secondary Drain Pan Hanger - Part No R01013034004 R50014032627 No Description Parts Not in Diagram Assy., Wheel & Housing Fan Motor Air Filter Assy.
Model : MCC 015 / 020 / 025 CW No Description 1 Cabinet MCC015CW MCC020CW MCC025CW 2 Fan Deck MCC015CW MCC020CW MCC025CW 3 Assy., Coil MCC 015CW MCC 020CW MCC 025CW 4 Primary Drain Pan MCC015CW MCC020CW MCC025CW 5 Secondary Drain Pan MCC015CW MCC020CW MCC025CW Part No No Description 6 Hanger 7 Parts Not in Diagram Assy., Wheel & Housing - Left Assy., Wheel & Housing - Right Fan Motor MCC015CW MCC020CW MCC025CW Air Filter MCC015CW MCC020CW MCC025CW Assy.
Model : MCC 028 CW No 1 2 3 4 5 6 7 8 9 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MCC 030 CW No 1 2 3 4 5 6 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MCC 038 CW No 1 2 3 4 5 6 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MCC 040 CW No 1 2 3 4 5 6 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MCC 050 CW No 1 2 3 4 5 6 7 8 9 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MCC 060 CW No 1 2 3 4 5 6 Description Assy., Top Panel Assy., Coil Assy., Drain Pan (Small) Assy., Drain Pan (Big) Assy., Wheel & Housing - Left Assy.
Model : MDB 075 BW NO PART NO. NO 1 BLOWER DESCRIPTION R50034023132 6 2 MOTOR R03039019596 3 FAN MOTOR BRACKET R01024008152 4 ASSY COIL R50024022843 5 TER. BOX DESCRIPTION PART NO. CAPACITOR 7.
Model : MDB 100 BW NO DESCRIPTION PART NO. 1 MOTOR R03039019598 2 BLOWER R50034023132 3 ASSY COIL R50024022844 4 TER.
Model : MDB 125 / 150 BW NO DESCRIPTION PART NO.
