Product data

Catalog 724-2 3
Nomenclature and Certication
Nomenclature and Certication
Daikin Thinline
™
Horizontal Fan Coils are intended for use in
single zone applications. They are available in sizes from 200
to 1200 cfm. Fig
ure 2 and Figure 3 describe the main features
of these units and can be referred to for component
placement. These units are available in two-pipe
configurations with one hydronic coil, with or without
electric heat for main or supplemental heating. They are also
available in four-pipe congurations with a primary coil and
a secondary reheat or preheat coil. A variety of factory-built
piping packages are available, either factory or eld-installed.
Units are available with a variety of control options, including
MicroTech
™
III controller board.
A choice of motors, PSC or ECM, is available. Fan Coil units
can be provided with a fresh air damper option—manual or
automatic.
AHRI Certication Agency Listed
Figure 1: Nomenclature
Figure 2: Model FCHH with return plenum
Standard size units certied
in accordance with the Room
Fan-Coil Unit certication
program, which is based on
AHRI Standard 440.
All standard units
All Canadian units
Unit Type
FC = Fan Coil
FH = Cabinet Unit Heater
Unit Conguration
H= Horizontal
Cabinet Type
C = Cabinet
R = Recessed
H = Hideaway
FC H C - 1 02 A
Voltage
A = 115/60/1
E = 208-230/60/1
J = 277-265/60/1
Unit Size
02 = 200 CFM
03 = 300 CFM
04 = 400 CFM
06 = 600 CFM
08 = 800 CFM
10 = 1000 CFM
12 = 1200 CFM
Design Series — 1
Return Plenum
Primary Coil
(Chilled Water Cooling)
2-, 3- or 4-row
Secondary Coil
(Hot Water or Steam Heating)
Standard or High Capacity
Drain Pain
Galvanized or Stainless Steel