Specifications

STEP 8:

Using the holes located above the return air opening on the unit attach the economizer to the REAR PANEL using the

screws removed in STEP 2 (SEE FIGURE 4).

FIGURE 4

WIRE TIES

(3) SCREWS

ECONOMIZER RAIN HOOD (FRESH AIR) ASSEMBLY

STEP 9:

Fasten (7) OA RAINHOOD ASSY – BOTTOM to the (5) OA RAINHOOD ASSY – LEFT SIDE and the (6) OA RAINHOOD

ASSY - RIGHT SIDE.

STEP 10:

Attach the two (9) OA RAINHOOD – FILTER RETAINERS to the (5) OA RAINHOOD ASSY – LEFT SIDE and the (6) OA

RAINHOOD ASSY – RIGHT SIDE from STEP 9 above. Please notice that the flange on the (9) OA RAINHOOD – FILTER

RETAINERS must be as shown in (SEE FIGURE 5) to retain the (2) PERMANENT FILTER.

STEP 11:

Fasten (8) OA RAINHOOD – TOP to the (5) OA RAINHOOD ASSY – LEFT SIDE and the (6) OA RAINHOOD ASSY –

RIGHT SIDE.

STEP 12:

Slide (2) PERMANENT FILTER between (9) OA RAINHOOD – FILTER RETAINERS and back into the (7) OA

RAINHOOD ASSY – BOTTOM. Attach (4) OA RAINHOOD – FILTER ACCESS to the front/top of (5) OA RAINHOOD

ASSY – LEFT SIDE and the (6) OA RAINHOOD ASSY – RIGHT SIDE.

Page 23