User Manual Wireless Display HDMI Extender IPW608/IPW607 Transmitter Receiver
1.
Hardware Installation–Transmitter IPW608-TX Step 1. Plug in the power adapter and ensure the power led lights are on. Step 2. (Optional): IR remote control setting Connect the IR blaster cable into the IR out port. Step 3. (Optional) Place the IR sensor on the source device, and mount the IR blaster head beside the device Step4. Directly connect the HDMI™ cable from the Transmitter HDMI™ in connector to your HDMI™ video source device.
2. Hardware Installation–Receiver IPW608-RX Step 1. Plug in the power adapter and ensure the power led lights are on. Step 2. (Optional): IR remote control setting Connect the IR extension cable (green connector) into the IR out port. Step 3. (Optional) Place and mount the IR sensor in front of the device. Step 4. Directly connect the HDMI™ cable from the Receiver HDMI™ out connector to your HDMI™ monitor.
3.
■ The User Manual Contains detailed instructions and a troubleshooting section, many common issues can be easily resolved by reading the user manual. ■ Telephone Support We stand behind our products and it is our goal to provide you with world class support.
