WAM DIRECT CNC ROUTER 3018-PRO dorisdirecus@outlook.
Contents Part 1: Package List ---------------------------------------------------------------------------------- 2 Part 2: Machine Installation ------------------------------------------------------------------------- 6 Part 3: CH340 Driver ---------------------------------------------------------------------------------- 18 Part 4: Engraving with Spindle & Control with PC ------------------------------------------ 21 Part 5: Offline Controller ---------------------------------------------------------------
Part 1: Package List If any accessories are missing, please contact us.
Name Bakelite Size Bakelite-A Bakelite-B Bakelite-D Bakelite-C Picture Qty 4 Stepper motor 2 Spindle & ER11 1 X-Z Axis Assembly 1 Slider 4 Nut Seat 1 Milling Cutter 10
Name Size Picture Qty Stepper Motor Line 3 Spindle Motor Line 1 24V Power Supply Import 110-220v 1 Control Board & Fan & Case 1 USB Cable 1 Plate Clamp 4
Name Size Picture Qty CD 1 Allen Wrench 4 M5*10 for control board Bolt M5*16 M3*14 for stepper motor Copper Nut 4 42 8 2 Nut 20M5 20*M5 16 Big Nut M5 30*M5 10 Spring 2 Coupling & Set Screw 2
Part 2: Machine Installation Bakelite:
Step 1 Base Assemble
Step 2 Table Assemble
Completed
Step 3 Base & Bakelite-C Installation
Completed
Step 4 X-Z Components Installation
Step 5 Bakelite-D Installation
Completed
Step 6 Spindle Installation
Step 7 Control Board Installation Control board Bolt M5*10 x4pcs Nut 20*M5 x4pcs
Step 8
Part 3: CH340 Driver Compatible Computer Systems: Windows XP, Windows 7, Windows 10 Please close the anti-virus software in your computer before installing the CH340 driver. Windows 10 system may prohibit driver installation, so you need to lift the restriction in the computer first. 1. Install the driver ( software Double clik Driver CH340SER.
2. Connect the control board to the computer with a USB cable first 3. View the COM number on your computer • Windows XP: Right click on "My Computer", select "Manage", select "Device Manager". • Windows 7: Click "Start" Right click "Computer" "Device Manager" from left pane. Select "Manage" Select • Windows 10: Click "Start" Right click "Computer" Select "Manage" Select "Device Manager" or ''Universal Serial Bus Controller''.
Part 4: Engraving with Spindle & Control with PC Use the USB cable for connecting computers.
• Console window print ” [CTRL+X] < Grbl 1.1f ['$' for help]” If the connection is successful. • Console window print ” Serial port error 1: No such file or directory “ indicate that the connection is failed.
Status: Idle means the connection was successful. If it appears: Unknown, pls contact us.
How to run gcode？-1> Click [open], Select the G code to run. 2> Click on the operation panel, move the spindle to the starting. Point of the engraving, so that the tool and the workpiece just touch. 3> Click [Zero XY] [Zero Z] Clear the XYZ axis coordinate. 4> Click [Send] running G code.
Part 5: Offline Controller Notice: When using the offline controller, remove the USB cable from the PC. Offline controller and PC cannot be used together. Connect offline controller to PC via USB cable, and then copy the nc file from PC to offline. Do not insert the SD card directly into the computer, otherwise the SD card may crash.
Offline manual controller can support spindle and laser engraving.
MENU page Ctrl Machine Control File Use the G-code file Press key [Y+] or [Y-] to select Press key [OK] to Enter
Control page Reference direction XX+ Z+ X+ X-axis positive direction X- X-axis negative direction Y+ Y-axis positive direction Y- Y-axis negative direction Z+ Z-axis positive direction Z- Z-axis negative direction OK/Spindle(SP) Spindle On/Off Exit/Step Long press to exit, short press to change step (0.
File page Press key [Y+] or [Y-] to select file Press key [OK] to Enter Press key [OK] to begin if you are ready.
Part 6: Engraving with Laser & Control with PC Note: If you want to buy a laser head, be sure to buy a laser head that is compatible with this control board of 3018pro.
Instruction: M03 stands for turning on the laser light M05 stands for turning off the laser light
After the laser lights up, you need to adjust the light spot to the minimum.
After the adjustment is completed, import the picture or nc file for engraving.
Dear friend, we have after-sales support, if you have any question, please feel free to contact us. Thank you for your support! dorisdirecus@outlook.
