Installation Instructions
18
3-DRAWINGS AND TECHNICAL FEATURES
TECHNICAL CHARACTERISTICS DECÒ Model AIR
Nominal output power 7,6 kW (6536 kcal/h)
Minimum output power 3,8 kW (3268 kcal/h)
Eciency at Max 87,6%
Eciency at Min 86,8%
Temperature of exhaust smoke at Max 172 °C
Temperature of exhaust smoke at Min 119 °C
Particulate /OGC / Nox (13%O
2
) 25 mg/Nm3 - 4 mg/Nm3 - 145 mg/Nm3
CO at 13% O
2
at Min and at Max 0,010 – 0,053%
CO
2
at Min and at Max 5,2% - 8,9%
Recommended draught at Max power**** 0,10 mbar - 10 Pa****
Minimum draw allowed for minimum power 0,02 mbar - 2 Pa
Smoke mass 6,5 g/sec
Hopper capacity 20 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 3÷40 mm
Pellet hourly consumption Min ~ 0,9 kg/h* - Max ~ 1,8 kg/h*
Autonomy At min ~ 15 h* - At max ~ 7 h*
Heatable volume m
3
163/40 – 187/35 – 218/30 **
Combustion air inlet Ø 50 mm
Smoke outlet Ø 80/100*** mm
Air inlet 80 cm
2
Rated electrical power (EN 60335-1) 55 W (Max 400 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 185 kg
Weight with packaging 203 kg
Distance from combustible material (rear\sides\oor) 20/50/0 mm
Distance from combustible material (ceiling\front) 800/800 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Using the adapter supplied with the product
**** Value recommended by the manufacturer (non-binding) for the optimal operation of the product
Head according to EN 14785 in agreement with the EU Building Products Regulation (EU 305/2011).