Installation Instructions

t
s
s
v
t
v
t
v
19
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
PREPARATION AND UNPACKING
The packaging consists of a recyclable cardboard box according to RESY standards, recyclable EPS foam inserts, wooden pallets. All
packaging materials can be reused for similar use or eventually disposed of as urban solid waste, in compliance with the regulations in
force. After having removed the packaging make sure the product is intact.
Handle the product with suitable means paying attention to the applicable safety regulations in force. Do not turn the
packaging over and handle the majolica parts with care.
The product is supplied in a single package. Open the package, remove the two screws “v” that secure the brackets to the stove and the two
screws “t” that secure the bracket to the pallet and then pull out the bracket “s”. There are two brackets fastening the stove to the pellet.
Install the stove in the chosen area, making sure it complies with the requirements.
The product must always be carried upright. Pay particular attention to the door and its glass, protecting them from mechanical knocks
that would compromise their integrity.
The product must always be handled with care. If possible, unwrap the stove near the chosen area of installation.
The packaging materials are neither toxic nor harmful, therefore no particular disposal measures are required.