Installation Instructions
31
6-LOADING THE PELLETS
Technical Dept. - All rights reserved - Reproduction is prohibited
LOADING THE PELLETS
LOADING THE PELLETS
Fuel is loaded through the upper part of the stove. Take the top and pull it towards you using the glove supplied.
Once the top has been extracted, you can pour the pellets in slowly so that it is deposited at the bottom of the tank.
If loading pellets when the stove is running, open the door of the tank using the glove supplied with the stove itself.
When loading, do not let the pellet bag come into contact with hot surfaces.
Never remove the protection grid inside the hopper.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specications.
Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
When the appliance is running and when it is turned o, most of the stove surfaces are very hot (door, handle, glass,
smoke outlet pipes, etc.). Therefore it is recommended to avoid coming into contact with these parts.