Installation Instructions

51
15-CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
CLEANING THE AIR FILTER
When the stove is installed, one must t the rear of the stove with the wire mesh air lter, whose purpose is to prevent dirt entering the
motor body and the internal sensor.
It is recommended to check that the lter is clean every 15/20 days. If needed remove u or the material that has deposited on it.
Inspection and cleaning are required more frequently if there are pets in the house.
To clean, simply turn the knob that holds the lter on the air intake pipe and remove the lter by turning it in the direction indicated by
the arrow. To clean it use a brush or a damp cloth or compressed air.
The lter is made of metallic mesh and is soft and exible therefore, when cleaning, be careful not to crush or
damage it. In the event of breakage it must be replaced.
ATTENTION!
Never let the stove work without the air lter tted. MCZ cannot be held liable for any damage caused to the internal
components if this requirement is not complied with.