Installation guide
26
4-INSTALLATION AND ASSEMBLY
WOODEN BEAM INSULATION
If you wish to mount a wooden beam, it must be protected with adequate insulation from the hot parts in order to prevent the risk of re
or damage to the cladding.
STANDARD CLADDING ASSEMBLY
The installation guide found in each specic cladding must be referred to for the assembly of MCZ product specic claddings.
FRAME ASSEMBLY
Once the cladding and/or the plasterboard wall is set up, t the frame.
This frame is meant for nishing and covering the gap between the metal structure of the product and the cladding.
The four screws for xing the frame are already screwed to the lateral columns. Simply open the door of the product, insert the frame as
shown in the gure, loosen the screws xed to the columns and tighten them fastening the frame to the structure.
1 - INSULATION APPLIED OR TO BE APPLIED
2 - WOODEN BEAM
3 - MARBLE OR OTHER MATERIAL
FRAME
SCREWS
LATERAL COLUMNS