Installation guide
45
7 - CONTROL PANEL
Technical Dept. - All rights reserved - Reproduction is prohibited
CONTROL PANEL LOGIC
Some useful information is provided below to understand the logic and use of the control panel:
• The control panel backlight switches o after about 30" seconds of keypad inactivity. To switch the backlight on again simply press
any of the panel buttons.
• The rst screen that appears displays the product operating status (ON, OFF, START-UP, SHUTDOWN..) which alternates according to
any activated settings (CHRONO, SLEEP, AUTO ECO..)
• By pressing any of the 4 keys around the display (C D E F) one enters the product operation setting screen (ame and ventilation
level, set temperature, automatic mode..). From this level the 4 keys around the display take on "dedicated" functions i.e. they are
directly referred to the corresponding wording that appears in the 4 corners of the display (e.g.: the wording at the top on the right
refers to key D).
• When modifying a setting on any menu level and the change is not conrmed via the "OK" key, leaving the keypad inactive for a few
seconds, the initial screen reappears automatically and the changes are not saved.
• If from any menu level one briey presses the on/o key (B), the display automatically goes back to the initial screen (product
operation status) without saving any unconrmed changes with the "OK" key.
•
KEY
A. Display that indicates a variety of product information besides the identication code of any malfunction.
B. ON/OFF key or ESC (exit from menu).
C. Programme choice key (following screen).
D. Programme choice key (following screen).
E. Programme choice key (following screen).
F. Programme choice key (following screen).
G Receiver for remote control (if present)
IMPORTANT NOTE It is possible to set the language on the control panel.