Installation guide
Mode:AUTO Menu
Temp:22°C Fan:A
21.0°C 21.04
OFF
Esc Off Set
< Crono >
Esc Set
< Data e Ora >
Esc Off Ok
< Sleep >
Esc 02:00 Ok
< Sleep >
1 2 3
4 5 6
50
7 - CONTROL PANEL
To explain SLEEP function simply, one can say that it allows to switch o the product starting from a minimum of + 10 minutes compared
to the hour displayed and to a maximum of 23.50 hours. To set the function press Menu with the key at the top on the right then Date and
Time appears on the screen, then scroll with the key at the bottom on the right until Sleep appears, conrm with the Set key. With the key
at the bottom on the right set the shutdown time. To conrm the selection press the key relative to OK (at the top on the right) otherwise
with ESC (at the top on the left) one exits and the settings are not saved. If the SLEEP function is active with CHRONO active, the rst has
priority, so the product will not switch o at the time programmed on the timer but instead at the time established by the sleep function.
Once the sleep function has been set, the rst screen alternately displays the product status (on/o) and the wording
sleep HH.MM. (HOURS-MINUTES).
During adjustment of the sleep function, by pressing and holding the right arrow key, when one reaches 23.50 of the
current day, the panel proposes to stop: release it and press it again to go onto the following day.
Esc 02:00 Ok
<
Sleep
>
Esc Off Ok
<
Sleep
>
Esc Off Set
<
Chrono
>
21.0°C 21.04
OFF
Mode: AUTO Menu
Temp: 22°C Fan: A
Esc Set
<
Date and Time
>