Installation guide
Mode:AUTO Menu
Temp:22°C Fan:A
Esc Set
< Data e Ora >
21.0°C 21.04
OFF
Esc Off Set
< Crono >
Esc P00 Ok
< Crono >
Esc Utente Ok
< Crono >
Esc Lu P00 Ok
< Personalizza >
1 2 3
4
7
5 6
51
7 - CONTROL PANEL
Technical Dept. - All rights reserved - Reproduction is prohibited
CHRONO FUNCTION
This function mode allows to programme start-up and shutdown of the product automatically.
Usually stoves have the CHRONO mode deactivated.
The basic settings of the CHRONO mode are:
• Choice of start-up/shutdown times
• Choice of day of programme activation
Setting the current day and time is essential for the proper operation of the chrono function.
CHRONO ACTIVATION AND SETTING A WEEKLY PROGRAMME
Explained below is how to activate the CHRONO function by choosing a weekly or daily programme:
press the Menu button, on the menu scroll to date and time with the relative key until CHRONO appears. Then press the SET key in order
to enter a programme. P00 appears at the centre of the display between Esc and Ok, by scrolling with the keys below one can choose
between 10 pre-set weekly programmes within the product control panel.
According to the tables shown in section "Pre-set weekly and daily programmes", choose the program which best meets our home's
heating requirements and memorise the program number on the control panel display, conrm with the OK key. If none of the pre-set
10 programmes meet our personal heating requirements, one can build a personal weekly program as one wishes (see next paragraph).
If the keypad stays inactive for 10 seconds the display of the control panel automatically exits the chrono setting
mode and does not conrm the last setting entered.
To conrm the CHRONO selection press OK.
ATTENTION!
The CHRONO function can be activated/deactivated both with the product switched on and o. If a chrono
programme has been activated, the rst screen alternately displays the product operation status (on/o/start-
up...) and the wording “CHRONO P01 active” (example).
21.0°C 21.04
OFF
Mode: AUTO Menu
Temp: 22°C Fan: A
Esc Off Set
<
Chrono
>
Esc Mo P00 Ok
<
Customise
>
Esc P00 Ok
<
Chrono
>
Esc User Ok
<
Chrono
>
Esc Set
<
Date and Time
>