Specifications

12 MDS 4790/9790 Series I/O Guide MDS 05-3438A01, Rev. E

Invisible place holder

Figure 7. Mounting Dimensions

Remote Front Panel Mounting—Optional Configuration

If desired, the front panel can be detached from the radio and mounted

separately to the rack cabinet. This optional kit, MDS P/N 03-3228A01,

is intended for rack-mount installations where all connections and con-

trol must be performed from the rear of the radio. The Auxiliary

Mounting Plate (P/N 82-3189A01) is included in the kit.

To remove the front panel from the radio and re-mount it to the Auxil-

iary Mounting Plate, follow these steps:

1. Detach the panel from the radio by grasping it ﬁrmly along its

bottom edge and pulling away from the radio chassis (Figure 8).

2. Release the modular RJ-11 connector and cable from the back of the

panel.

3. Plug RJ-11 the connector into an in-line splice connector

(P/N 73-1155A09).

4. Plug one end of the RJ-11 to RJ-11 extension cable into the in-line

splice connector and the other end into the front of the chassis at the

square cut-out.

3.5 inches

(88.9 mm)

17.2 inches

(437 mm)

14.29 inches

(363 mm)