Specifications

MDS 05-3438A01, Rev. E MDS 4790/9790 Series I/O Guide 31
See Section 6.3, Detailed Command Descriptions, beginning on
Page 35 for detailed information about these commands.
Commands and Command Parameters
Most commands can be used in two ways. Typing only the command:
For example: REPEATER
will display the current information.
Typing the command, followed by a space and a parameter value:
For example: REPEATER ON
will implement a change of a radio parameter. Parameters and their
meanings are listed in the summary tables, as well in the detailed com-
mand descriptions which follow.
The following conventions are used in the tables:
• Command parameters, if any, are shown in brackets [ ] follow-
ing the command entry.
•A string of lower-case “x”s in a command parameter stands for
a letter or number key.
• “xxx.xxxxx” stands for a decimal number. (The decimal point
position may vary.)
• “mm,” “dd,” and “yyyy” stand for month, day and year, respec-
tively. (The number of characters used for month and year may
vary.)
• “hh,” “mm,” and “ss” stand for hours, minutes and seconds,
respectively.