User`s guide

28 MDS iNET 900 Series User’s Guide MDS 05-2806A01, Rev. E.1
• Bolded items indicate a menu selection • Spacebar used to make some menu selections • AP = Access Point Only • RM = Remote Only
Device Mode Network Name SNTP Server Max. Remotes
(AP)
Database Timeout (AP) IP Address Config. Ethernet Addr. Config. DHCP Server Config. SNMP Agent Config. Mobility Mode
Network
Configuration
Radio
Configuration
Serial Gateway
Configuration
Device
Information
Maintenance/Tools
Security
Configuration
Reprogramming Configuration Scripts Authorization Key
MAIN MENU
RF Output Power Data Rate (RM) Compression (AP) Dwell Time (AP) Beacon Period (AP)
Performance
Information
NOTES • Chart shows top-level view only. Details are given on the following pages. • Not all items are user-configurable • Some menu items depend on the Device Mode selected
RTS Threshold
RF Hopping Format
(AP)
Skip Zones (AP)
RSSI Threshold (RMT)
SNR Threshold (RMT)
Seamless Inter-Frame Delay
(UDP Point-to-Point example shown)
Serial Number
Hardware Version
Firmware Version
Console Baud Rate
Uptime
Model Number
Date Format
Time
Date
Device Names
Login Status
Two-way Authentication
Encryption
Auto Key Rotation
(AP)
HTTP Access
SNMP Mode
Telnet Access
Approved Remotes List
(AP)
Encryption Phrase
Force Key Rotation
HTTP Security Mode
User Password
Serial Mode
Flow Control
RF Power Output
Signal-to-Noise
RSSI
Actual Data Rate
RSSI By Zone
Event Log
Packet Statistics
Remote Listing
(AP)
Endpoint Listing (AP)
Remote Perf. Listing
(AP)
Radio Test
Ping Utility
Reset to Factory Defaults
Configuration
Data Baud Rate
Packet sends
Time to Live
Local IP Port
Multicast IP Port
Multicast IP Addr.
IP Protocol
Status
COM1 & COM2 Serial Data Port
Serial Config. Wizard
Fragmentation Threshold
Hop Pattern Seed
(AP)
Auto Data Rate Config.
Figure 3-1. Embedded Management System—Top-level Flowchart