User manual

you receive a message that require the update of the list.
If you update the list, all the previous information are
deleted. Each element of the list shows the name of the
thermostat and its IP address; in order to communicate
with a specific sensor, just touch the desired sensor.
• The "Delete" button allows you to manually delete a
sensor from the list.
• -The "Edit" button (pencil) allows you to change the
name of a thermostat on the list. To change the name of
the thermostat, turn on the function and tap the name of
the thermostat you want to change, enter the new name
and press “OK”.
• -The "Register sensor" button (globe) allows you to as-
sociate the thermostat to your account on the website
and the registration is possible only if the function has
been activated and the web sensor has sent at least once
its operating parameters. Before using this function acti-
vate the web connection in "Settings" tab and wait at
least 15 minutes. By enabling this function, the active
sensor is associated to your account previously created
on the website (see next chapter). If you have not al-
ready created an account, you must first proceed to cre-
ate your account on www.ithermo4all.eu. After record-
ing the sensor, you can also remotely control it through
the site: www.ithermo4all.eu
The purchase of each thermostat includes the use of the
remote management for a period of 12 months from the
22