elōsTM professional hair removal system User Guide
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What is Electro-Optical Synergy (elōs)?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Content. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB Introduction… Congratulations on purchasing your mē system! mē is an innovative device that can be used in the comfort and privacy of your own home to treat unwanted hair. mē is the only at-home permanent hair removal device to use patented elōs technology and is clinically proven to be safe and effective for all skin tones. Gentle, easy to use and just minutes a treatment, now you can experience the freedom of silky, smooth skin without the hassles of shaving and waxing.
GB What is Electro-Optical Synergy (elōs)? Electro-optical Synergy (elōs) is the unique and patented technology that drives the mē’s ability to remove unwanted hair. It combines two types of energy- Intense Pulsed Light (IPL) and Radio Frequency (RF) to remove hair through selectively targeting the hair follicle in a safe yet effective manner. Invented by Dr.
GB Package Content Inside the packaging of your mē you will find the following: • mē system with one cartridge and protective cap already installed • Facial Adaptor • Protective cap(already installed) • elōs protective cap • Power Cord • User Guide • Goggles for facial treatment • Cleaning Brush Additional Accessories Sold separately • Shaver • Epilator • Replacement elōs cartridges memyelos.
GB mē includes the following components: 1. Base unit. 2. Cradle. 3. Control panel with: power button elōs energy setting buttons indicator when the elōs cartridge is finished and needs to be replaced accessory activation button 4. Applicator (hand piece with cord). 5. elōs cartridge with elōs output window and RF contact bars.
On the applicator and cartridge you will find GB 1. elōs pulses output window. 2. RF skin contact bars: The 2 RF bars must be in complete contact with the skin for the light pulses to flash. 3. Cartridge: The cartridge comes attached to the applicator and is preloaded with light pulses. You will need to replace the cartridge when the Empty indicator light on the base unit is red. 4. elōs activation button. 5. Cooling Outlet. 6. Protective cap.
GB Important safety information Important Safety Information - Read Before Use! Read all warnings and safety information in the user manual before using the mē system. Always follow basic safety precautions when using any electrical product. mē is not designed for everyone. Please read this User Guide before using it. Make sure you follow all the warnings. Also don’t use the device if it isn’t right for you (see Contraindications section below).
GB • DO NOT use if you are under the age of 18. The effects of using mē in this age group are unknown. • DO NOT use if you have any skin condition in the treatment area, including acne, sores, psoriasis, eczema, burns, herpes simplex, wounds or a rash. These conditions can make the skin more sensitive to the light treatment and could make the treatment uncomfortable or cause skin swelling, blisters or infection. Wait for the affected area to heal before using.
GB • DO NOT leave mē unattended around children, as the cords represent a choking hazard. Children should be supervised to ensure that they do not play with the appliance. • DO NOT use if your skin is sensitive to light. This condition could make the light treatment uncomfortable or cause skin swelling, blisters or infection. In order to determine if you can use mē, perform a test on a small patch of skin. Then, wait 30 minutes to see if any skin reactions developed.
Use of mē could result in possible side effects. These reactions are rare and should resolve within a short time. However, every cosmetic treatment may involve some degree of risk. Possible rare reactions are described in the table below with the recommended action. The reaction Recommended action Colour or textural changes to the skin that may be permanent May occur either at the time of treatment or after.
GB What is the Intended Use for mē? mē is intended for permanent reduction of unwanted hair. Skin Tone mē is intended for body use on ALL skin types (skin colour you are born with). Hair Colour mē is intended for use on ALL hair colours. Note: For effective results, epilator attachment is required for body treatment of naturally light blond, red and white/ grey hair. Epilator should not be used on the face.
GB How to use Step 1: preparing for mē Remove hair in the area you intend to treat (or alternatively, use the dedicated mē epilator/ shaver accessories). Step 2: skin sensitivity test Before using the system for the first time, choose a small area close to the area you intend to treat, for the purpose of performing a skin sensitivity test. Follow the treatment instructions below. After the skin test, wait 30 minutes and check your skin for any reaction.
GB The face adaptor has been designed to accommodate smaller and more delicate treatment areas on the face. It delivers energy in single pulse mode at the desired energy level. The face adaptor can be either included in this package (configurations vary) or purchased separately as an accessory. Facial Skin tones Make sure to perform a skin sensitivity test before you start your treatment (check the user guide for more info). 1. Clean your skin and remove the hair on the surface of the skin.
htly arding d its ghts registered nc. and its 10 min For best results, use mē on the same body area once a week for the first 7 times. Performing additional maintenance treatments, after the first 7 treatments, will help your hair removal results last longer. To treat hair successfully, perform one treatment every week for 7 weeks We recommend treating the face every 1-2 weeks.
GB Cleaning and storage 11. Place the applicator in its cradle on the base unit. 12. Turn off the system by pressing the power button on the base unit. 13. Gently rinse your skin with warm water. 14. Gently apply moisturising cream to your skin. 15. Unplug the electric cable from the electrical outlet. 16. Clean the cartridge light output window with a nonalcoholic based wet wipe or soft tissue. 17.
Gently rinse your skin with lukewarm water and pat dry. Be sure to carefully protect the treated skin with sunscreen throughout the hair removal period. Failure to follow this warning could result in skin swelling, blisters, temporary or permanent skin discoloration or skin whitening or darkening. GB Post-treatment care How To Replace Your Cartridge/Shaver/Epilator/ Face adaptor Replacing your cartridge: 1.
GB Replacing your designated mē shaver, epilator or face adaptor: 1. Make sure that the mē system is turned off and the cable is unplugged from the electrical wall outlet. 2. Remove the protective cap from the applicator by gently pulling it out. 3. Take the shaver, epilator or face adaptor out of its protective container. Slide it gently into the applicator until you feel it “clicks” into place. 2. 4. Place the applicator on the cradle of the base unit before turning on the mē system. 5.
The mē system is designed with universal voltage. That means that you can use the system all over the world. You will need to use an adaptor for the plug, since electric wall outlets vary by country. Make sure that mē system does not get wet while traveling. GB Traveling with your mē system Do Not use it in a wet environment. memyelos.
GB Troubleshooting Indicator What does it mean How to react Control Panel 18 No lights are on Power cable is not connected Connect power cable All elōs energy level lights are blinking No elōs energy level was selected. Select an elōs level. The applicator fan will start blowing indicating that the cartridge is active. elōs activation button is blinking elōs energy level was selected. elōs activating button flashes to indicate that it needs to be pressed. Press the cartridge activation button.
Cartridge slot is empty. Insert cartridge protective cap or cartridge. Accessory activation button on base is flashing Accessory slot is empty. Insert face adaptor, or accessory (shaver/epilator), or a protective cap. Cartridge level indicator is blinking Amount of pulses remaining in elōs cartridge is low Prepare a new cartridge to be in-hand. Cartridge level indicator is constantly on No more pulses remaining in elōs cartridge Insert a new elōs cartridge. My skin is red after treatment.
GB Guarantee & Service HoMedics Inc. guarantees this product from defect in material and workmanship for a period of 2 years from the date of purchase, except as noted below. This HoMedics product guarantee does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorised accessory; alteration to the product; or any other conditions whatsoever that are beyond the control of HoMedics. This guarantee is effective only if the product is purchased and operated in the UK / EU.
me ˉ is manufactured by Syneron Medical Ltd. and is distributed in the UK, and Ireland by HoMedics Group Ltd. Syneron Medical Ltd. reserves the right to make changes to its products or specifications without notice, to improve performance, reliability, or manufacturability. Information furnished by Syneron Medical Ltd. and HoMedics Group Ltd. is believed to be accurate and reliable. However, Syneron Medical Ltd. and HoMedics Group Ltd.
GB Labels And Symbols The nameplate label is adhered to the bottom of your mē system. It displays the manufacturer’s name & address, the system’s part & serial numbers, electrical requirements and regulatory standards that the system is designed to comply with. Degree of protection against ingress water: ordinary. This device is not suitable for use in the presence of flammable anesthetic mixture with air or with Oxygen or Nitrous Oxide.
Light spectrum: 550 – 1200 nm Max Optical: 4J/cm2 RF Wave frequency: 6.
Validate your warranty for mē and receive product updates and special offers at www.memyelos.com Jan 2013 All rights reserved. Syneron and mē are trademarks of Syneron Beauty Ltd. and may be registered in certain jurisdictions. Publication 0113, REV.
