Tus neeg siv phau ntawv

T1 antenna

This antenna forces the locators in stand bye to transmit the signal to be detected. The T1

antenna will saturate the tracker signal in stand by and force it to restart and then

transmit the signal.

Keep the detector switched off, insert the T1 antenna into the input (as in the photo) and place the

detector in the car to be checked for 5/10 minutes.

It is advisable to enter the car first, insert the T1 probe and place the detector on the seat,

then close the door and move away from the vehicle. For 5/10 minutes no one must be

inside or near the car.

After 5/10 minutes get into the vehicle and immediately remove the T1 probe, turn on the

detector and start the vehicle sweeping procedure.

Warnings

The T1 probe is very powerful and saturates the GPS signal this means that when it is in operation

it is recommended that nobody is in the vicinity of the vehicle because the probe gives off an

ultrasonic saturation signal. Approach only to activate and deactivate the probe.