Tus neeg siv phau ntawv

Thermographic probe

This probe uses thermography technology to identify the presence of heat generated by

both battery and mains powered spy devices.

The thermographic probe must be passed over objects or points with no heat in order to

check whether there are any spying electronic devices inside them.

Two inspections are recommended:

1. Survey the environment or vehicle with the power still on

2. Inspect the environment or the vehicle after turning off the power and waiting for

cooling

Insert the probe into the input (as in the photo) using its connector, it will be recognized

automatically and will activate immediately.

When using the T4 probe, keep the detector off.

1. Detection of the heat point

2. Temperature measurement

3. Environmental thermography detection bar

4. Thermographic detection sensor