Tus neeg siv phau ntawv

In this mode you can view the event history

Detector Mode 2:

This mode has an innovative function, the possibility of detecting the distance in cm of

the signal.

Our detector through a new patent is able to measure the distance, this is possible by

combining and analyzing the various information received from the M1-PRO.

The distance is determined by the propagation time of the transmitted signal and by its

power.

This function may be accurate or approximate depending on the signal strength, ambient

noise or the type of transmitting device. As we know, not all devices and environments to

be reclaimed are the same.

For a correct use of the function, it is recommended to first put the mobile phone in use

with APP in Airplane mode, turn off all known signals and then start the measurement.

The measurement takes place omnidirectionally, this means that if the device indicates

60cm, it means that the signal is in an omnidirectional radius of approximately 60cm

from the position of the detector.

In this mode you can also leave the device in monitoring and view the history with the

measurements in cm at a later time, this is very useful because you can then go and look

for signals in the indicated range. The system can give two results:

Example:

Distance: 20cm

Distance between 20cm-40cm