Tus neeg siv phau ntawv

Using the Keys on the Detector:

Press and hold the power switch for 3 seconds, release your finger after hearing the

beep, the "Full Band Detector" light will be on, the default detection mode of 0 – 20GHz

full frequency band is activated and the Antenna receiving terminal (ANT1) is activated.

Two antennas can be installed arbitrarily according to your needs. Short press (MODE) to

switch the working mode, there are 4 modes to switch. Long press (MODE) to switch to

mute mode, the mute light in mute mode is always on (to cancel mute mode, press and

hold again).

Short press (Range) to adjust the sensitivity level, there are two levels high and low for

you to adjust.