Meaco DD8L Desiccant Dehumidifier Instruction Manual Meaco DD8L Desiccant Dehumidifier Please read this instruction manual before using the dehumidifier and keep safe for future reference. Thank you for choosing Meaco, we really do appreciate it.
Product Description Air outlet Air inlet filter and grill Continuous drainage Water container Power cord Control panel Water level window 2
Safety Instructions PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. In case of a failure whilst under warranty we will collect the dehumidifier from you for repair/replacement, therefore please save the packaging and keep it safe away from children. When you do dispose of the packaging please recycle. WARNING - This appliance is intended for use in a domestic environment only.
17. To repair the unit, take it to a qualified service engineer. Repairs carried out by unqualified people may cause damage to the unit or injury to persons or property and void the warranty. 18. Where possible, avoid the use of an extension cable as they may overheat and cause a risk of fire. Only use an extension cord after ensuring it is in perfect condition. voltage drop which will affect the dehumidifier.
Control Panel Power - Press this button to turn the dehumidifier on, the unit bleeps three times when it is turned on. Tank Full - Lights up when the internal tank is full of water and needs to be emptied or when the tank is incorrectly fitted. Fault - Lights up when a fault is detected. Most common would be the air inlet being blocked leading to the dehumidifier over heating internally. Clean the filter; make sure that the dehumidifier is not next to a heat source (i.e.
dehumidifier in as small a room as possible with the door and windows closed. The dehumidifier will dry continuously to try to achieve a relative humidity of about 35%rh which will help to dry the washing efficiently. In Laundry Mode the dehumidifier will turn off after 6 hours to save energy. Take care to ensure that the dehumidifier does not become covered by the washing and that no water drips onto the dehumidifier.
Occasionally you might notice the temperature of the air coming out of the dehumidifier will feel coole r. This is perfectly normal and part of the overall dehumidification process whereby the heater is rested during the regeneration process for the desiccant wheel. Dehumidifier Set Up and Use • Position on a stable, flat surface. • Please ensure the unit is a safe distance away from a wall or furniture.
Amount of water collected • When you first use your dehumidifier it will work harder to reduce the room humidity down to 50%rh (in “Normal” mode). frequently. This is the time when it will produce the most water and need emptying most As the room becomes dryer the dehumidifier collects less water and takes longer to fill the tank, this is perfectly normal. When the target relative humidity has been reached the dehumidifier will stop collecting water, again this is normal.
ATTENTION ! Never use the device with a damaged power cord, plug, cabinet or control panel. Never trap the power cord or allow it to come into contact with sharp edges. Failing to follow the instructions may lead to the guarantee becoming void.
Emptying The Water Continuous Drainage When the water container is full: The DD8L will stop dehumidifying and the fan will stop after a cool down period. The DD8L will then bleep and the Empty Tank LED will flash Empty the water container and replace it in the correct position. The dehumidifier will start to work again. If the “Empty tank” light stays on and the unit does not start up then the tank is not correctly fitted.
Cleaning Switch the dehumidifier off and remove the plug from the socket before cleaning. The exterior: Clean the exterior with a soft, dry cloth. cleaning agent. If the device is extremely dirty, use a mild Wipe the dehumidifier with a slightly damp cloth. Never spray the device with water. The air filter: When used regularly, the filter may become clogged with dust and particles. Therefore the filter should be cleaned at least every two weeks. Follow these steps: 1. Remove the filter. 2.
Troubleshooting Problem The unit does not Cause Solution The power is not connected. Insert the plug into the wall outlet. The water container is full. Remove the water from the container. The water container has not been replaced Place the water container in the correct correctly. position. The air filter is clogged. Clean the air filter. The temperature in the room where the The machine does not dehumidify below dehumidifier is operating is too low.
air. dehumidification process. Knocking noise Motor that rotates the desiccant wheel is low on Run the dehumidifier in Laundry mode for coming from the lubrication. two days to increase the lubrication, if fault dehumidifier persists then call Meaco. Alarm light on Restricted airflow to the dehumidifier or Clean the filter and make sure that the unit continuously temperature below freezing. is more than 30cm from a wall.
• Machine has been working hard and needs to cool down internally. If you find that this happens and none of the buttons on the control respond, then do not worry, this is normal and the dehumidifier is still drying the air as per the setting you left it in. The control panel will start to work again when the conditions allow.
Warranty Terms & Conditions There is a two year warranty on your dehumidifier from the date of purchase. Please register your purchase at https://eu.meaco.com/pages/registrieren-garantie. Registering allows us to keep you update with any important developments concerning your product. All material or manufacturing defects will be repaired free of charge. The following applies: ⚫ Any repairs or replacement of components during the warranty period will not result in an extension of the warranty period.
Technical Specifications Model Meaco DD8L desiccant dehumidifier Power consumption 30/330/650 watts Power supply 220-240V / 50Hz Dehumidifying capacity 8 litres / day Capacity water container 2 litres Air flow 80/100/115m3/h For homes up to Small 5 bedroom house Operating range 1 – 37°C Dimensions (w x d x h) 351 x 188 x 500mm Net weight 6.4Kgs Gross weight 7.4Kgs Sound pressure level 39/43/48dB Fuse rating 250V. F1.