User's Manual

After selecting the Pressure Window, press and hold ALARM
button to toggle the bar chart between the sea level pressure with
a word “PRESSURE” displayed at the right bottom corner of
the chart, temperature with a thermometer icon and “CH1” and
a humidity with “RH” icon and “CH1”.
MOON PHASE ICONS
New
Moon
Waning
Crescent
Waning
Crescent
First
Quarter
Waxing
Gibbous
Full
Moon
Waning
Gibbous
Last
Quarter
TEMPERATURE/ HUMIDITY WINDOW
The main unit supports up to 3 remote sensors, corresponding to
a separate channel of the temperature and relative humidity
display. The temperature can be displayed in Celsius (ºC) or
Fahrenheit (ºF).
The main unit carries the temperature and humidity sensor and
uses this data to calculate an indoors comfort level - Wet,
Comfort or Dry.
A temperature alert function is available for all channels. It can
be programmed to sound if the channel temperature exceeds or
falls below the pre-set upper and lower limits.
REMOTE SENSORS STATUS
The wave icon above the current channel icon shows the
connection status of the corresponding remote sensor:
Icon Status
Searching for the signals from the
remote sensor
Corresponding remote sensor signal
received successfully
No signals received for over 1 hour
SEARCH FOR REMOTE SENSORS
• The main unit can be manually activated to search for the
signals from remote sensors by pressing and holding DOWN
(? ) button.
31