SDS

Office 1.801.886.9495 Fax 1.801.886.9497

Stability: Stable

Hazardous Polymerization: Will not occur

Conditions to Avoid: Excessive heat, poor ventilation and oxidizing agents

Materials to Avoid: Oxidizing agents, strong alkalis or active metals.

Hazardous Decomposition Products: Will not occur

Section 11

Toxicological Information:

Routes of Entry: Inhalation, Ingestion, Skin and Eyes

Toxicity to Animals: Corrosive

Chronic Effects on Humans: Not Established

Special Remarks on Toxicity: Unlikely to cause harmful effects under recommended conditions of handling and use.

Section 12

Ecological Information:

Eco-toxicity: Aquatic Toxicity (Guideline 201 and 202)

Products and Biodegradation: Biodegradable, according to appropriate OECD tests

Special Remarks on the Product of Biodegradation: Ingress to waterways may cause persistent turbidity.

Section 13

Disposal Considerations:

Waste Disposal Method: For large quantities, place material in a settling pond and add ferric acid or lime. Decant water. Dispose

of waste with Absorbent, like NewLook’s Absorbent and dispose of waste in accordance with local, state and federal environmental

law. This product may be considered hazardous waste as defined in RCRA regulations due to its corrosive characteristics.

Section 14

Transport Information:

DOT Proper Shipping Name: Concrete Cleaner/Dissolver

DOT Hazard Class ID Number: Non-hazardous, Not required, Class 55

Section 15

Regulatory Information:

SARA (Title III) Section 313: Not subject to Reporting Requirements

TSCA (5/1997): All components are on the TSCA inventory list.

Federal Hazardous Substance Act: Product is a hazardous substance subject to statutes promulgated under the Subject Act.

Canadian Environmental Protection Act: All components of this product are on the Domestic Substance List (DSL) and

acceptable for the use under the provisions of CEPA.

Canadian WHMIS: Considered to be a non-hazardous material

Section 16

Other Information:

The SDS should be read before product disposal. Pass SDS information to all persons who could be exposed to the

product. The SDS has been prepared according to OSHA hazard Communication Standard (29 CFR 1901.1200). To the best

of our knowledge, the information contained herein is accurate and based on sources believed to be reliable. However,

since data, safety standards and government regulations are subject to change, NewLook International, Inc. makes no

warranty, either expressed or implied, with respect to the completeness or continuing accuracy of the information