Data Sheet

File Name:CSP-3000-SPEC 2021-09-03
Function Manual
※ Mode Setting
1. Output Voltage/Current Programming
3000W Power Supply with Single Output
CSP-3000 serie s
PIN6
PIN5
PV/PC SET(SVR2)
※ PV/PC Set adjustment
◎ Adjust the resistance(SVR2) can set output voltage or constant current point, the adjusting range is 20%-100% of max voltage or max
CN2
PIN6
PIN5
PIN5/PIN6
CONDITION
SHORT
OPEN
PV/PC MODE CHOSE
PV/PC ADJUST
CN1
CN1:
MODE
PV MODE
PC MODE
FUNCTION
Output Voltage Programming
Output Current Programming
max.
※ The factory default settings:PV mode output max voltage pin5/pin6 short by jumper cap.
When pull out the jumper cap,the default settings: PC mode output max constant current.
PC range
120V
2.4 ~ 30A(max.)
250V
1.4~ 17A(max.)
400V
0.8 ~ 10A(max.)
4
6 8 10
V
Iout
100
40
60
80
8
0.8
MODEL
40
60 80 1008
%
PV range 18 ~ 120V(max.) 37.5 ~ 250V(max.) 60 ~ 400V(max.)
4
6 8 10
V
Vout
100
40
60
80
15
1.5
CURRENT ADJUSTMENT /(%)
PIN5/PIN6 ACCESS TO EXTERNEL VOLTAGE SIGNALS(DC/PWM)
40
60 80 10015
%
VOLTAGE ADJUSTMENT /(%)
PIN5/PIN6 ACCESS TO EXTERNEL VOLTAGE SIGNALS(DC/PWM)
constant current point.
◎ In the CN2, pin5/pin6 access external 10V voltage signal or 500-1KHz PWM signal can adjust the output voltage or constant current point.
Non-Linear Non-Linear
CN2:PIN5/PIN6needstooperatewitha10VsinkingsignalorPWM signal,Max.sinkcurrent1mA.