Data Sheet

ManualsBrandsMean Well ManualsAC DC PSU ComponentsMean Well DLP-04L SMPSU 240 mA 3.84 W 18.7 V DC

■ Order Name Encoding

Series name

■ Description



Compact size with 2 (35mm) width(type R)SU

Universal input / Full rangeAC

Withstand 300 Surge input for 5 secondsVAC

Isolation class Ⅱ

 (type L)No load power consumption<0.5W

Protections: Short circuit / Over voltage

Cooling by free air convection

3 color for status indicatorLED (type R)

Installed on rail -35/7.5 or 15(type R)DIN TS

100% full load burn-in test

3 years warranty

■ Features ■ Applications

DLP - 04 R

DALI Bus Power Supply

DLP- 04 series

File Name: -04- 2018-08-16DLP SPEC

DALI Bus

DALI Bus Powered Units

Rated wattage

Shape

The Power Supply -04 is a power supply with high efficiency and a small supplying mA forDALI DLP ,size 240

DALI DALIcontrol gears and devices hich without power supply circu ts.The -20~+60 wide temperaturewi℃

operating range can meet all kinds of applications.

It is perfectly suitable power up any products labeled with the trademark ith over 3 years of industrialfor . w 5DALI

power supply experience, -04 is engineered to be a reliable and safe solution for bus environmentDLP DALI .

( -04R)DLP ( -04L)DLP

R:Rail type

L:Linear type

{

Summary of content (7 pages)

PAGE 1
DLP-04 DALI Bus Power Supply (DLP-04R) (DLP-04L) 10 ■ Features Compact size with 2SU(35mm) width(type R) Universal AC input / Full range Withstand 300VAC Surge input for 5 seconds Isolation class Ⅱ No load power consumption<0.5W(type L) Protections: Short circuit / Over voltage Cooling by free air convection 3 color LED for status indicator(type R) Installed on DIN rail TS-35/7.
PAGE 2
DLP-04 DALI Bus Power Supply series SPECIFICATION MODEL DLP-04R RATED DC VOLTAGE 16V DC VOLTAGE RANGE 15.3~18.7V RATED CURRENT 240mA DLP-04L GUARANTEED SUPPLY CURRENT 240mA MAXIMUM SUPPLY CURRENT 250mA OUTPUT RATED POWER 3.84W RIPPLE & NOISE (max.)Note.2 50mVp-p INPUT SETUP, RISE TIME 250ms, 50ms/115VAC,230VAC HOLD UP TIME (Typ.) 70ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz AC CURRENT (Typ.) 0.1A/115VAC INRUSH CURRENT (Typ.
PAGE 3
DLP-04 DALI Bus Power Supply series Block Diagram fosc: 100 KH z RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING +V -V DETECTION CIRCUIT O.L.P. CONTROL O.V.P.
PAGE 4
DLP-04 DALI Bus Power Supply ※ R-Type Case No.985A series Unit:mm (Unit:mm,tolerance±0.5mm) 58.4 35 54.5 4 45.15 63.65 90 2 1 3 35 ADMISSIBLE DIN - RAIL : TS 35/7.5 OR TS 35/15 Terminal Pin No. Assignment Pin No. Assignment 1 DA- 2 DA+ Pin No.
PAGE 5
DLP-04 DALI Bus Power Supply series ※ L-Type Case No.PLM-25 Unit:mm 145 4.5 ψ3.5 4.5 1 2 4.5 38 2 1 TB3 TB4 22 3.5 4.5 NOTE: The input and output line for using UL1015 18AWG*2C is suggested Terminal Pin No. Assignment (TB3) : SWITCHLAB MWX201-75002EB(GRAY) Pin No. 1 2 Assignment AC/N AC/L Terminal Pin No. Assignment (TB4) : SWITCHLAB MWX201-75002B(BLUE) Pin No.
PAGE 6
DLP-04 DALI Bus Power Supply series Installation Manual N L N L DLP-04 DA+ L N L N LED Dimming Driver DA- DA DALI Bus DALI DALI DALI Master DC OUTPUT LED LED Dimming Driver DA DA DALI-GC DC OUTPUT LED DA DALI-GC ◎Cautions Central DALI power supply rated at 240mA(DALI standard allows max.250mA). The controls interface of a DALI ballast normally source<2mA,with 64 individual addresses this will source 128mA.
PAGE 7
DLP-04 DALI Bus Power Supply series System start-up timing 1.After external power-on ,timing of a bus power supply shall be as shown in table 1. 2.A receiver shall be ready to receive frames within the maximum receiver start-up time specified in Table 1. 3.A transmitter or a multi-master transmitter shall not start transmissions earlier than the transmitter start-up time specified in Table 1.