Data Sheet

ManualsBrandsMean Well ManualsAC DC PSU ComponentsMean Well AC/DC PSU module 133 A 3192 W 30 V DC Adjustable power output

Factory control or automation apparatus

Test and measurement instrument

Laser related machine

Aging facility

Digital broadcasting

Constant current source

Redundant system

■ Model Encoding / Order Information

■ Description



Universal AC input / Full range

Built-in active PFC function

High efficiency up to 94.5%

Forced air cooling by built-in DC fan

Output voltage and constant current level programmable

Active current sharing up to 16000W (4+1)

Protections: Short circuit / Overload / Over voltage /

Over temperature

Optional conformal coating

Optional PMBus or CANBus protocol

5 years warranty

■ Features ■ Applications

3200W Power Supply with Single Output

DPU-3200 series

Output wattage

Output voltage(24V/48V)

24DPU - -3200

File Name:DPU-3200-SPEC 2019-09-25

4.21

Dimension

325.8

12.8

107

41 (1U)

(1U)

inch1.61

DPU-3200 is a 3.2KW single output enclosed type AC/DC power supply with 1U low profile and a high

power density up to 37W/inch . This series operates for 90~264VAC input voltage and offers the models

with the DC output mostly demanded by the industry. Each model is cooled by the thermostatically

controlled fan. Moreover, DPU-3200 provides vast design flexibility by equipping various built-in functions

such as output programming, active current sharing, remote ON-OFF control, auxiliary power, and etc.

Type

Communication Protocol

CAN

Blank None

PMBus protocol

CANBus protocol

Note

By request

In Stock

UL62368-1 TPTC004 IEC62368-1EN62368-1

Bauar

Sicherheit

egel gema

t gepru ft

www.

ID 2000000000

tuv.com

wac g

Series name

Communication protocol option

Summary of content (8 pages)

PAGE 1
3200W Power Supply with Single Output DPU-3200 series Dimension L * W * H 325.8 * 107 * 41 (1U) 12.8 * 4.21 * 1.61 (1U) mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 UL62368-1 EN62368-1 TPTC004 IEC62368-1 ■ Features Universal AC input / Full range Built-in active PFC function High efficiency up to 94.
PAGE 2
DPU-3200 3200W Power Supply with Single Output series SPECIFICATION MODEL OUTPUT DPU-3200-24 DPU-3200-48 DC VOLTAGE 24V 48V RATED CURRENT 133A 67A CURRENT RANGE 0 ~ 133A 0 ~ 67A RATED POWER 3192W 3216W RIPPLE & NOISE (max.) Note.2,3 300mVp-p 23.5 ~ 30V VOLTAGE ADJ. RANGE 480mVp-p 47.5 ~ 58.8V ±1.0% VOLTAGE TOLERANCE Note.4 ±1.0% LINE REGULATION ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.
PAGE 3
DPU-3200 3200W Power Supply with Single Output series BLOCK DIAGRAM PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC ORING FET RECTIFIERS & FILTER POWER SWITCHING -S DETECTION CIRCUIT ORING FET CONTROL O.V.P. DETECTION CIRCUIT MCU PV/PC O.T.P. TRANSCEIVERS MCU O.T.P. RECTIFIERS & FILTER STATIC CHARACTERISTICS AUX. POWER 5V/0.3A 12V/0.
PAGE 4
DPU-3200 3200W Rack Mountable Front End Rectifier series FUNCTION MANUAL 1. Voltage Drop Compensation 1.1 Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V PIN15 +S LOAD PIN16 -S -V CN1 -V +V Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 1.
PAGE 5
DPU-3200 3200W Power Supply with Single Output series 3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim) ※ The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. Iout PIN11 PC -V CN1 +V OUTPUT CURRENT (%) 110 PIN14 -V(signal) EXTERNAL VOLTAGE (DC) 100 Non-Linear 20 ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
PAGE 6
DPU-3200 3200W Power Supply with Single Output series 6.Current Sharing with Remote Sense DPU-3200 has the built-in active current sharing function and can be connected in parallel, up to 5 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V.
PAGE 7
3200W Power Supply with Single Output DPU-3200 series MECHANICAL SPECIFICATION Case No.256 6.25 276 22.8 29.6 21.6 30 Unit:mm 2-M4 L=5 21 2 2 28 2 -V 1 CN1 15 16 (TOP View) 2 8 SVR 1 LED SW1 7 CN500 Air flow direction +V 107 2 38 10 1 2 3 9 I/P 2 2 ψ 6. 12 max. 6.25 22.8 13 41 5 2-M4 L=5 276 325.8 1 1 97.9 (Bottom View) 53.5 3-M3 L=4 6.9 1 16 241.5 46 ※ Mounting Instruction Hole No. 1 2 Mounting Surface Recommended Screw Size M3 M4 MAX.
PAGE 8
3200W Power Supply with Single Output DPU-3200 series ※ LED Status Indicators LED Green Red Red (Flashing) Description The power supply functions normally. The LED will present a constant red light when the abnormal status (OTP, OLP, fan fail and charging timeout) arises. The LED will flash with the red light when the internal temperature reaches 60℃; under this condition, the unit still operates normally without entering OTP.