Datasheet

SPECIFICATION
MODEL
MTBF
DIMENSION
NOTE
PACKING
1. All parameters NOT specially mentioned are measured at 24VDC input, rated load and 25 of ambient temperature.
2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
FileName:DR-RDN20-SPEC2011-06-17
20A PowerSupplyRedundancyModule
DR-RDN20
Features :
OUTPUT
INPUT
OTHERS
ENVIRONMENT
DR-RDN20
REVERSEVOLTAGE(max.)
OUTPUTCURRENT(max.)
VOLTAGEDROP
LEDINDICATORS
INPUTVOLTAGERANGE
NUMBEROFINPUTS
INPUTCURRENT(max.)
INPUTVOLTAGE ALARM
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
VIBRATION
RELAY CONTACTRATING(max.)
30V
20A
0.5V
TwogreenLEDsindicatingeachinputis"OKorfail"
21~28V
Two
20A perinput
Wheninputis>20V( 5%)or<30V
( 5%)relaycontacts
30VDC,1A
-20~+70
20~90%RHnoncondensing
-40~+85 ,10~95%RH
10~500Hz,2G10min./1cycle,periodfor60min.eachalongX, Y,Zaxes;Mouning:CompliancetoIEC60068-2-6
FUNCTION
996.8Khrsmin.MIL-HDBK-217F(25 )
55.5*125.2*100mm(W*H*D)
0.5Kg;20pcs/11Kg/1.29CUFT
Suitable for redundant operation of 24V system
Installed on DIN Rail TS35 / 7.5 or 15
Relay contact signal output and LED indicator for input failure alarm
Cooling by free air convection
3 years warranty
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
Terminal-Chassis:>100MOhms/500VDC/25 /70%RH
Terminal-Chassis:0.5KVAC,RelayContacts-Terminal:0.5KVAC
SAFETY &
EMC
(Note2)
CompliancetoEN55022(CISPR22)ClassB, EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11,heavyindustrylevel,criteria A
PSU
PSU PSU
PSU PSU PSUPSU PSU PSU PSU
Load
Load
Load
Vout
DR-RDN20
DR-RDN20 DR-RDN20
DR-RDN20 DR-RDN20 DR-RDN20
Vout Vout Vout
Vout Vout
Vin A
Vin A Vin A
Vin A Vin AVinB
VinB VinB
VinB
..............
VinB
1.1+1Redundancy
Using1morePSUastheredundantunit
3.SingleUse:ConnectingonlyonePSUtooneDR-RDN20toreducethestressofthediodesandhenceincreasethereliability
2.1+NRedundancy:UsingmorePSUsastheredundantunitstoincreasethereliability
Typical ApplicationNotes
EMCIMMUNITY
EMCEMISSION