Data Sheet

ManualsBrandsMean Well ManualsLED DriversMean Well FDLC-100 LED driver Constant power 100 W 1300 - 3000 mA 30 - 54 Vdc adjustable, PFC circuit, Outdoor, not dimm

File Name:FDLC-100-SPEC 2019-01-22

100W Constant Power Mode LED Driver

FDLC-100 series

■ Features ■ Applications

■ Model Encoding

FDLC -

100

Rated wattage

Series name

■ Description



Constant Power mode output

Metal housing design

Full Power at 70~100% max. current

Built-in active PFC function

 <0.5WNo load power consumption

IP67 rating for indoor or outdoor installations

Output current adjustable via potentiometer

3 years warranty

LED flood lighting

LED decorative lighting

LED architectural lighting

FDLC-100 series is a 100W LED AC/DC LED power supply featuring the constant power

mode output, FDLC-100 operates from 180 295VAC and output current can be adjust～

between 1300mA to 3000mA. Thanks to the high efficiency up to 90%, with the fanless

design, the entire series is able to operate for -30 ~ +90 case temperature under℃℃

free air convection. The design of metal housing and IP67 ingress protection level allows

this series to fit both indoor and outdoor applications. FDLC-100 is equipped with output

current adjustable function so as to provide the optimal design flexibility for LED lighting

system.

IP67

110

SELV

M M

Summary of content (5 pages)

PAGE 1
FDLC-100 100W Constant Power Mode LED Driver M ■ Features Constant Power mode output Metal housing design Full Power at 70~100% max. current Built-in active PFC function No load power consumption <0.
PAGE 2
FDLC-100 100W Constant Power Mode LED Driver series SPECIFICATION MODEL FDLC-100 OUTPUT CURRENT REGION 1300~ 3000mA(1850mA default) RATED POWER Note.2 100W OUTPUT CONSTANT CURRENT REGION Note.2 30 ~ 54V FULL POWER CURRENT RANGE 1850 ~ 3000mA OPEN CIRCUIT VOLTAGE(max.) 59V ±5.0% CURRENT TOLERANCE SET UP TIME Note.3 500ms/230VAC VOLTAGE RANGE 180 ~ 295VAC 254 ~ 417VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.
PAGE 3
100W Constant Power Mode LED Driver FDLC-100 series BLOCK DIAGRAM PWM fosc : 60~130KHz EMI FILTER & RECTIFIERS I/P POWER SWITCHING O.T.P. O.L.P. PWM & PFC CONTROL RECTIFIERS & FILTER +V -V DETECTION CIRCUIT CASE GROUND OUTPUT CURRENT SETTING ◎I-V Operating Area. Output rated current level can be adjusted through built-in potentiometer FDLC-100 54.00V 1.85A,54V 1.3A,54V 52.00V 50.00V 48.00V 46.00V 44.00V 42.00V 40.00V 38.00V 36.00V 34.00V 3A,33V FDLC-100 32.00V 30.00V 28.00V 1.
PAGE 4
FDLC-100 100W Constant Power Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 100 100 80 80 70 60 LOAD (%) LOAD (%) 60 40 20 -30 -20 -10 0 15 30 50 40 20 70 (HORIZONTAL) 60 -30 -20 0 20 AMBIENT TEMPERATURE,Ta (℃) 45 55 65 75 90 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 80℃ 1 90 0 .9 8 80 0 .9 6 70 PF LOAD (%) 100 277V 0 .9 4 230V 60 0 .9 40 180 115V 0 .
PAGE 5
FDLC-100 100W Constant Power Mode LED Driver series AC input voltage drop vs. output current characteristics AC input drop Io drop 10% 8% 5% 3% <13% <11% <6% <3% NOTE: Output current will return to the rated value within 90ms MECHANICAL SPECIFICATION CASE NO.: 261A Unit:mm 180 4.5 171 300±20 161 20 300±20 (Green-Yellow) 75 53 +V(Red) -V(Black) H05RN 1.0mm²*3C H05RN 1.0mm²*2C 4- 4.5 : Max. Case Temperature 33 tc 52.85 15.4 PE tc 34.5 50.