Manualshelf

Certificates

ManualsBrandsMean Well ManualsDIN Rail PSUsMean Well HDR-60-24 Rail mounted PSU (DIN) 24 V DC 2.5 A 60 W 1 x
1
Declaration of Conformity
For the following equipment：
Product Name: Din Rail Switching Power Supply
Model Designation: HDR-60-x(x=5,12,15,24,48)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards
were applied：
RoHS Directive (2011/65/EU)
、(EU)2015/863
Low Voltage Directive (2014/35/EU)
：
EN62368-1:2014+A11:2017
EN61558-1:2005+A1/EN61558-2-16:2009+A1
CB certificate No：DK-90193-UL
TUV certificate No：R50360932
Electromagnetic Compatibility Directive (2014/30/EU)
：
EMI (Electro-Magnetic Interference)
Conducted emission / Radiated emission
EN55032:2015 Class B
Harmonic current
EN61000-3-2:2014
Voltage flicker
EN61000-3-3:2013
EMS (Electro-Magnetic Susceptibility)
EN55024:2010+A1:2015 EN61000-6-2:2005
ESD air
EN61000-4-2:2009
Level 3 8KV
ESD contact
EN61000-4-2:2009
Level 2 4KV
RF field susceptibility
EN61000-4-3:2006+A1:2008+A2:2010
Level 3 10V/m
EFT bursts
EN61000-4-4:2012
Level 3 2KV/5KHz
Surge susceptibility
EN61000-4-5:2014
Level 4 2KV/Line-Line
Conducted susceptibility
EN61000-4-6:2014
Level 3 10V
Magnetic field immunity
EN61000-4-8:2010
Level 4 30A/m
Voltage dip, interruption
EN61000-4-11:2004 >95% dip 0.5 periods 30% dip 25 periods >95% interruptions 250 periods
Note:
A component power supply with load will be installed into final equipment which consists of an electronically shielded metal
enclosure. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.
The EMC tests mentioned above are performed using a well defined metal plate to simulate said metal enclosure.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies”.(as available on
http://www.meanwell.com)” and TDF (Technical Documentation File).
This Declaration is effective from serial number EB9xxxxxxx
Person responsible for marking this declaration：
MEAN WELL Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 24891, Taiwan
(Manufacturer Address)
Johnny Huang/Manager, Certification Center：
Alex Tsai/Director, Marketing Department：
(Name / Position) (Signature)
(Name / Position) (Signature)
Taiwan
Nov. 27th, 2019
(Place)
(Date)
Version：3

Summary of content (1 pages)