Datasheet

ManualsBrandsMEAN WELL ManualsLED DriversLED Driver 45W 1.05A 43V

■ Model Encoding

■ Description

■ Features ■ Applications



LED panel lighting

LED flood lighting

Indoor LED lighting

Rated output current(350/500/700/1050/1400mA)

Output wattage

Series name

350

IDPC

File Name:IDPC-45-SPEC 2018-01-10

IDPC-45 series is a 45W PCB type LED AC/DC driver featuring the constant current mode output

with flicker free design. IDPC-45 operates from 90~295VAC and offers models with different rated

current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless

design, the entire series is able to operate for -20 ~+40 ambient temperature under free air convection.℃℃

IDPC-45 is equipped with various function options, such as dimming methodologies, so as to provide

the optimal design flexibility for lighting system.

Function options

45W Constant Current Mode LED Driver

IDPC-45 series

Constant Current mode output

Flicker free design

PCB type design

Built-in active PFC function

No load power consumption<0.5W(Blank-Type),

Standby power consumption<0.5W(DA-Type)

Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output; DAL

3 years warranty

Type

Blank

Function Note

In Stock

2 in 1 dimming (0~10VDC and 10V PWM)

DALI control technology

(for DA-Type only)

Note: The DALI control model(DA Type) only for IDPC-45 Non Auxiliary DC output models.

A:Auxiliary DC output(12V@50mA)

:None

{

SELV

Summary of content (6 pages)

PAGE 1
45W Constant Current Mode LED Driver (for DA-Type only) ■ Features Constant Current mode output Flicker free design PCB type design Built-in active PFC function No load power consumption<0.5W(Blank-Type), IDPC-45 series SELV S&E ■ Applications LED panel lighting LED flood lighting Indoor LED lighting Standby power consumption<0.
PAGE 2
IDPC-45 45W Constant Current Mode LED Driver series SPECIFICATION IDPC-45 -350 IDPC-45 -500 IDPC-45 -700 IDPC-45 -1050 IDPC-45 -1400 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA RATED POWER 33.25W 45W 44.8W 45.15W 44.8W CONSTANT CURRENT REGION Note.2 57 ~ 95V 54 ~ 90V 38 ~ 64V 26 ~ 43V 19 ~ 32V OPEN CIRCUIT VOLTAGE(max.) 118V 115V 84V 63V 50V 84% 83% MODEL OUTPUT CURRENT RIPPLE 5% max. @rated current CURRENT TOLERANCE ±7.
PAGE 3
IDPC-45 45W Constant Current Mode LED Driver series Block Diagram fosc : 70KHz AUX+(for IDPC-45A) AUX- (for IDPC-45A) RECTIFIERS I/P EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING O.L.P. PWM&PFC CONTROL CURRENT LIMIT Vo+ VoDIM+(DA+) DIM-(DA-) DETECTION CIRCUIT DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs.
PAGE 4
IDPC-45 45W Constant Current Mode LED Driver series TB1 ACL ACL ACN ACN - DIMMING OPERATION FS1 + HS1 DIM-(DA-) TB2 HS2 Vo+ Vo- A K A DIM+(DA+) O G I ※ 2 in 1 dimming function Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
PAGE 5
IDPC-45 45W Single Output LED Power Supply series OUTPUT LOAD vs TEMPERATURE 90~295VAC for 350mA Model,200~295VAC for others 100 80 90~200VAC for models other than 350mA Model LOAD (%) 60 40 20 -20 -10 0 10 20 30 (HORIZONTAL) 40 AMBIENT TEMPERATURE,Ta (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC 100 1 for 350mA Model 90 0.95 80 PF LOAD (%) 0.9 for others 70 60 50 115V 0.85 230V 277V 0.8 40 0.75 90 135 180 295 200 0.
PAGE 6
IDPC-45 45W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION Unit:mm 120 112 1 4 *ψ - 4 FS1 2 3. 5 3 M 4 M + TB1 3 A K A 2 HS2 58.5 66.5 HS1 1 4 5 6 TB2 25 O G I IDPC-45 ※ Terminal Pin No. Assignment(TB2) ※ Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Pin No. 1 2 Assignment ACL ACL ACN ACN Assignment DIM+(DA+) DIM-(DA-) Pin No. 3 4 Assignment Vo+ Vo- IDPC-45A ※ Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 Assignment DIM+ DIMVo+ Pin No.