Datasheet

ManualsBrandsMEAN WELL ManualsLED DriversLED Driver 63W 1.7A 36V

■ Model Encoding

■ Description

■ Features ■ Applications



LED panel lighting

LED flood lighting

Indoor LED lighting

Rated output current(700/1050/1400/1750mA)

Rated wattage

Series name

1400

IDPC

File Name:IDPC-65-SPEC 2018-01-10

Function options

65W Constant Current Mode LED Driver

Constant Current mode output

Flicker free design

PCB type design

Built-in active PFC function

No load power consumption<0.5W(Blank-Type),

Standby power consumption<0.5W(DA-Type)

Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output; DALI

3 years warranty

IDPC-65 series is a 65W PCB type LED AC/DC driver featuring the constant current mode output

with flicker free design. IDPC-65 operates from 180~295VAC and offers models with different rated

current ranging between 700mA and 1750mA. Thanks to the efficiency up to 89%, with the fanless

design, the entire series is able to operate for -20 ~+40 ambient temperature under free air convection.℃℃

IDPC-65 is equipped with various function options, such as dimming methodologies, so as to provide

the optimal design flexibility for lighting system.

Type

Blank

Function Note

In Stock

2 in 1 dimming (0~10VDC and 10V PWM)

DALI control technology

IDPC-65 series

A:Auxiliary DC output(12V@50mA)

:None

{

Note: The DALI control model(DA Type) only for IDPC-65 Non Auxiliary DC output models.

(for DA-Type only)

SELV

Summary of content (6 pages)

PAGE 1
IDPC-65 65W Constant Current Mode LED Driver (for DA-Type only) SELV ■ Features Constant Current mode output Flicker free design PCB type design Built-in active PFC function No load power consumption<0.5W(Blank-Type), series S&E ■ Applications LED panel lighting LED flood lighting Indoor LED lighting Standby power consumption<0.
PAGE 2
IDPC-65 65W Constant Current Mode LED Driver series SPECIFICATION IDPC-65 -700 IDPC-65 -1050 IDPC-65 -1400 IDPC-65 -1750 RATED CURRENT 700mA 1050mA 1400mA 1750mA RATED POWER 65.1W 65.1W 64.4W 63W CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V MODEL OUTPUT CURRENT RIPPLE 5% max. @rated current CURRENT TOLERANCE ±7.0% SETUP TIME 500ms / 230VAC Note.4 AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.
PAGE 3
IDPC-65 65W Constant Current Mode LED Driver series BLOCK DIAGRAM fosc : 70KHz AUX+(for IDPC-65A ) AUX- (for IDPC-65A ) RECTIFIERS I/P EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING O.L.P. PWM&PFC CONTROL CURRENT LIMIT Vo+ VoDIM+(DA+) DIM-(DA-) DETECTION CIRCUIT DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs.
PAGE 4
IDPC-65 65W Constant Current Mode LED Driver series ACL ACL ACN ACN TB1 FS1 - DIMMING OPERATION P P + S DIM+(DA+) DIM-(DA-) Vo+ Vo- HS2 HS1 TB2 S ※ 2 in 1 dimming function Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
PAGE 5
1 0.95 0.9 0.85 277V 0.8 230V 0.75 0.
PAGE 6
IDPC-65 65W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION Unit:mm 130 122 - 4 *ψ FS1 1 2 3 + S 59.5 TB1 67.5 P P 4 3. 5 S 1 2 3 4 5 6 20.5 HS2 HS1 TB2 Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Assignment ACL ACL ACN ACN IDPC-65 Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 4 Assignment DIM+ (DA+) DIM- (DA-) Vo+ Vo- IDPC-65A Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 Assignment DIM+ DIMVo+ Pin No.