Datasheet

ManualsBrandsMEAN WELL ManualsIndustrial Relays8-Channel LED Dimming Actuator KNX, 16A, Screw Terminal

■ Model Encoding

■ Description

The KNX actuator is a 8 channel device with high quality independent latching relay for switch,

shutter or any possible mixed applications. The compact design with 4 units (72 mm)

wide modular makes it suitable for installation in the distribution board on 35 mm

mounting rails in the EIB / KNX application. The connection to the KNX bus is implemented

via a bus connection terminal.The switching relays are particularly suitable

for switching ohmic loads, capacitive loads, for instance LED drivers and inductive

loads as well as motors in shutter or blind applications.The actuator are powered

via the EIB / KNX and do not require any additional power supply.

8 channel actuator in a compact size

Suitable for various and mixed applications

For AX, C-load, capacitive & inductive of loads

Program via ETS5.0 software

Manual control via Push button

Programmable various time and scene function

3 years warranty

Building Automation

Lighting switch

Shutter/Blind control(Planned)

Heating control

Ventilation function

■ Features ■ Applications

File Name:KAA-8R-SPEC 2019-07-24

Series name

R:Relay on/off for 8-channel(8 fold)

KAA - 8R

KAA-8R

KNX Universal Actuator

Blank: 16A per channel

{

-10: 10A per channel

Type

Blank

8 channel actuator, 16A per channel

Function Note

In stock

-10 8 channel actuator, per channel10A

In stock

Summary of content (7 pages)

PAGE 1
KNX Universal Actuator ■ Features 8 channel actuator in a compact size Suitable for various and mixed applications For AX, C-load, capacitive & inductive of loads Program via ETS5.
PAGE 2
KAA-8R KNX Universal Actuator SPECIFICATION MODEL SUPPLY KAA-8R KNX BUS VOLTAGE 21~31V CURRENT CONSUMPTION <6mA POWER CONSUMPTION <180mW KAA-8R-10 Nr. OF SWITCHING OUTPUT 8 4(Planned) Nr. OF SHUTTER OUTPUT OUTPUT TYPE Independent, potrential-free bistable(latching) relay VOLTAGE 230VAC@50Hz CURRENT OHMIC LOAD 16A CAPACITIVE LOAD 220μF(See Note.2) 800A(max. 200μs),165A(max. 20ms) MAX. INRUSH CURRENT OUTPUT SWITCHING EN60947-4-1 AC1(COSθ=0.8) 16A RATINGS EN60947-4-1 AC3(COSθ=0.
PAGE 3
KAA-8R KNX Universal Actuator Block Diagram KNX BUS DRIVER TRANSCEIVER MCU RELAY1 CHANNEL 1 RELAY2 CHANNEL 2 RELAY8 CHANNEL 8 Mechanical Specification Case No. KAA Unit:mm 57 72 53.1 B C B μ D C E μ μ D F G E H 230VAC / 16A O μ F μ G μ 90 KAA-8R Universal Actuator 8CH Prog. >1s 45 μ A 57.84 μ A H 35 ADMISSIBLE DIN-RAIL:TS35/7.
PAGE 4
KAA-8R KNX Universal Actuator Max. output load per channel Maximum load KAA-8R KAA-8R-10 3680W 2300W refer to table below refer to table below Incandescent lamps 2300W 2300W Halogen lamps 230V 2300W 2300W Halogen lamps, electronic transformer 1300W 1300W Fluorescent lamps, not compensated 2000W 2000W Fluorescent lamps, parallel comp. 1200W 1200W 15 15 600W 600W Resistive load or heater LED driver Max. number of electronic transformers Shutter motor Nr.
PAGE 5
KAA-8R KNX Universal Actuator The maximum number of the MEANWELL LED driver that can be connected to each channel at 230V is shown as below Suggested model LPF-16 LPF-25 LPF-40 LPF-60 LPF-90 LPF-16D LPF-25D LPF-40D LPF-60D LPF-90D LPH-18 LPHC-18 LPV-20 LPV-35 LPV-60 LPV-100 LPV-150 NPF-40 NPF-60 NPF-90 NPF-120 NPF-40D NPF-60D NPF-90D NPF-120D PCD-16B PCD-25B PCD-40B PCD-60B PLC-30 PLC-45 PLC-60 PLC-100 PLD-16B PLD-25 PLD-40B PLD-60B PLM-12 PLM-25 PLM-40 PLN-20 PLN-30 PLN-45 PLN-60 PLN-100 PLP-30 PLP-45 PL
PAGE 6
KAA-8R KNX Universal Actuator The maximum number of the MEANWELL LED driver that can be connected to each channel at 230V is shown as below Suggested model HLN-40H HLN-60H HLN-80H HLP-40H HLP-60H HLP-80H CEN-60 CEN-75 CEN-100 CLG-60 CLG-100 CLG-150 ELG-75 ELG-100 ELG-150 ELG-75-C ELG-100-C ELG-150-C HBG-100 HBG-160 HBG-240 HBG-60 HLG-40H HLG-60H HLG-80H HLG-100H HLG-120H HLG-150H HLG-185H HLG-240H HLG-320H HLG-600H HLG-60H-C HLG-80H-C HLG-120H-C HLG-185H-C HLG-240H-C HLG-320H-C HSG-70 HVG-65 HVG-100 HVG-1
PAGE 7
KAA-8R KNX Universal Actuator Configuration and Commissioning The application program(database) can be downloaded via Online Catalogs from ETS or via http://www.meanwell.com/productCatalog.aspx Typical application ◎ Application 1:Work with non-dimmable driver 230vac L N μ μ A A B C B μ D C E μ μ D G F LED driver V+ V- LED E H KAA-8R 230VAC / 16A O μ μ F G μ Universal Actuator 8CH Prog.