Datasheet
■ Description
KNX proof gateway
Easy configuration & installation
Cost effective solution for smart building
Connect up to 64 DALI ECGs/Drivers
Built-in DALI power supply
LCD 2x12 display
Lighting control via the button
Lighting control via the integrated web server
Up to 16 DALI lighting groups setting
Up to 16 DALI scenes setting
3 year warranty
Office lighting
Smart home lighting
villas lightingLuxury
LED indoor lighting
■ Features ■ Applications
KDA-64
KNX to DALI Gateway
Made in
EU
File Name:KDA-64-SPEC 2017-09-27
KDA-64 is used to connect a digital DALI lighting system to the KNX installation. Thus, room-based
lighting control is conveniently incorporated into the higher-level KNX building management system.
The device transforms switch and dim commands from the connected KNX system into DALI telegrams
and status information from the DALI bus into KNX telegrams.
KDA-64 is a Category 1 device (in accordance with EN 62386-103). This means the device must only be
used in DALI segments with connected ECGs and not with other DALI control devices within the
segment (No multi-master function).
Power supply for the up to 64 connected ECGs comes directly from the KDA-64. An additional DALI
power supply is not required and not permitted.
The device comes in a 4 units wide DIN Rail casing so it can be directly integrated into the mains
distribution box. Connection to the KNX bus is via a bus connector. DALI Bus is connected via screw
connectors on the device.
ECGs can be switched, dimmed and set to a defined value in 16 groups per gateway. In addition to
group control, KDA-64 offers the possibility to individually control up to 64 ECGs.