Datasheet

ManualsBrandsMEAN WELL ManualsLED DriversLED Driver 63W 1.75A 36V IP67

65W Constant Current Mode LED Driver

■ Model Encoding

■ Description

■ Features ■ Applications

Rated output current(700/1050/1400/1750mA)

Output wattage

Series name

1050

ODLC

Function options

Constant Current mode output

Flicker free design

Plastic housing with class II design

Built-in active PFC function

No load power consumption<0.5W(Blank-Type),

Standby power consumption<0.5W(DA-Type)

IP67 rating for indoor or outdoor installations

Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output; DALI

3 years warranty

LED panel lighting

LED flood lighting

Indoor LED lighting

ODLC-65 series is a 65W LED AC/DC driver featuring the constant current mode output with

flicker free design. ODLC-65 operates from 180~295VAC and offers models with different rated

current ranging between 700mA and 1750mA. Thanks to the efficiency up to 88%, with the

fanless design, the entire series is able to operate for -20 ~+85 case temperature under free℃℃

convection. The design of plastic housing and IP67 ingress protection level allows this series

dimming methodologies, so as to provide the optimal design flexibility for lighting system.

to fit indoor wet applications. ODLC-65 is equipped with various function options, such as

Type

Blank

Function Note

In Stock

2 in 1 dimming (0~10VDC and 10V PWM)

DALI control technology

ODLC-65 series

File Name:ODLC-65-SPEC 2018-09-29

A:Auxiliary DC output(12V@50mA)

:None

{

Note: The DALI control model(DA Type) only for ODLC-65 Non Auxiliary DC output models.

M M

SELV

Type HL

(for DA-Type only)

IP67

(for enclosure design only)

Summary of content (6 pages)

PAGE 1
65W Constant Current Mode LED Driver M (for DA-Type only) M SELV ■ Features Constant Current mode output Flicker free design Plastic housing with class II design Built-in active PFC function No load power consumption<0.5W(Blank-Type), ODLC-65 IP67 series Type HL (for enclosure design only) ■ Applications LED panel lighting LED flood lighting Indoor LED lighting Standby power consumption<0.
PAGE 2
ODLC-65 65W Constant Current Mode LED Driver series SPECIFICATION ODLC-65 -700 ODLC-65 -1050 ODLC-65 -1400 ODLC-65 -1750 RATED CURRENT 700mA 1050mA 1400mA 1750mA RATED POWER 65.1W 65.1W 64.4W 63W CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V MODEL OUTPUT CURRENT RIPPLE 5% max. @rated current CURRENT TOLERANCE ±7.0% SETUP TIME 500ms / 230VAC Note.4 AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.
PAGE 3
ODLC-65 65W Constant Current Mode LED Driver series Block Diagram fosc : 70KHz AUX+(for ODLC-65A ) AUX-(for ODLC-65A ) RECTIFIERS I/P EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING O.L.P. PWM&PFC CONTROL CURRENT LIMIT Vo+ VoDIM+(DA+) DIM-(DA-) DETECTION CIRCUIT DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs.
PAGE 4
ODLC-65 65W Constant Current Mode LED Driver series DIMMING OPERATION AUX-(Green)* AUX+(Yellow)* Vo-(Black) Vo+(Red) DIM- (DA-)(Gray) DIM+ (DA+)(Purple) ACN(Blue) ACL(Brown) *AUX-/AUX+ only for ODLC-65A ※ 2 in 1 dimming function Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
PAGE 5
1 0.95 0.9 0.85 277V 0.8 230V 0.75 0.
PAGE 6
ODLC-65 65W Constant Current Mode LED Driver MECHANICAL SPECIFICATION Case No.ODL-65A series Unit:mm 3.5 121 3.5 200±10 150±10 77 30 tc 150±10 30 ACN(Blue) ACL(Brown) 3.5 AUX-(Green)* AUX+(Yellow)* Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple) 200±10 *AUX-/AUX+ only for ODLC-65A : Max. Case Temperature 2*ψ4.5 3.5 2.5 28.5 tc AC wire No. Assignment(AC IN) ACN(Blue) SVT 18AWG ACL(Brown) SVT 18AWG ODLC-65 DC wire No.