Declaration of conformity

EC declaration of conformity
For the following equipment
Product Name: Switching Mode Battery Charger
Model Designation: PB-xP-z (x=300,360) (z=12,24,48)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards
were applied
Low Voltage Directive (2006/95/EC)
EN60335-1:2002+A1+A11+A12+A2+A13+A14+A15;
EN60335-2-29:2004+A2:2010
CB certificate NoJPTUV-051607
Electromagnetic Compatibility Directive (2004/108/EC)
EMI (Electro-Magnetic Interference)
Conducted emission / Radiated emission
EN55022:2010
EN55011:2009+A1:2010
EN61000-6-3:2007+A1:2011
EN61204-3:2000
Class B
Class B
EN61000-3-2:2006+A1:2009+A2:2009
EN61000-3-3: 2013
EMS (Electro-Magnetic Susceptibility)
EN55024:2010 EN61204-3:2000 EN61000-6-1:2007
EN61000-4-2:2009
Level 3 8KV
EN61000-4-2:2009
Level 2 4KV
EN61000-4-3:2006+A1:2008+A2:2010
Level 2 3V/m
EN61000-4-4:2012
Level 2 1KV/5KHz
EN61000-4-5:2006
Level 3 1KV/Line-Line 2KV/Line-Earth
EN61000-4-6:2009
Level 2 3V
EN61000-4-8:2010
Level 2 3A/m
EN61000-4-11:2004 >95% dip 0.5 periods 30% dip 25 periods >95% interruptions 250 periods
Note:
The power supply is considered as a component that will be operated in combination with final equipment. Since EMC
performance will be affected by the complete system, the final equipment manufacturers must re-qualify EMC Directive on the
complete system again.
For guidance on how to perform these EMC tests, please refer to TDF (Technical Documentation File).
This Declaration is effective from serial number RB04xxxxxx
Person responsible for marking this declaration
Mean Well Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 248, Taiwan
(Manufacturer Address)
Johnny Huang/Senior Verification Engineer
Ted Cheng/Product Manager
(Name / Position) (Signature)
(Name / Position) (Signature)
Taiwan
Mar. 21st, 2014
(Place)
(Date)
Version2

Summary of content (1 pages)