Data Sheet

ManualsBrandsMEAN WELL ManualsBattery ChargersVRLA charger PB-Akkulader 28,8V 21A 24 V SLA, Lead-acid, Lead acid membrane

Charger for lead-acid batteries (flooded, Gel and AGM) and

Li-ion batteries (lithium iron and lithium manganese) (Note.1)

2/3/8 stage charging (Note 5)

Built-in battery rescue function

Controlled by microprocessor

Universal AC input / Full range

Built-in active PFC function PF>0.95

Protection: Reverse polarity / Short circuit / Over voltage / Over temperature

3 color LED loading indicator

Built-in remote ON-OFF control

Built-in temperature compensation function

 (depends on charging current)Built-in fan speed control

3 years warranty

■

Features :

SPECIFICATION

PB-600-12 PB-600-24 PB-600-48

MODEL

OUTPUT CURRENT

BATTERY TYPE

RECOMMENDED BATTERY

CAPACITY(AMP HOURS)

(Note 4)

OUTPUT

VOLTAGE RANGE

FREQUENCY RANGE

EFFICIENCY (Typ.)

INPUT

ENVIRONMENT

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

SAFETY &

EMC

(Note 3)

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

OVER VOLTAGE

PROTECTION

AC CURRENT (Typ.)

14.4V 28.8V 57.6V

13.8V

40A

Open & Sealed Lead Acid

135 ~ 400AH

27.6V 55.2V

21A 10.5A

70 ~ 210AH 35 ~ 105AH

90 ~ 264VAC 127 ~ 370VDC

47 ~ 63Hz

86% 87% 89%

6.8A/115VAC 3.4A/230VAC

25A/115VAC 50A/230VAC

<3.5mA / 240VAC

16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V

Protection type : Shut down o/p voltage, re-power on to recover

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V), EN62368-1(48V only) EAC TP TC 004 approved

Compliance to EN55032 class B (CISPR32), EN61000-3-2,-3, EAC TP TC 020

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024; light industry level, criteria A, EAC TP TC 020

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

-20 ~ +60 (Refer to "Derating Curve")℃

20 ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH non-condensing℃

±℃℃0.05%/ (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

MTBF

135.6K hrs min. MIL-HDBK-217F (25 )℃

230*158*67mm(L*W*H)

DIMENSIONOTHERS

NOTE

PACKING

2.2Kg; 6pcs/14.2Kg/1.76CUFT

1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.

2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

3. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

4. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.

5. Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time.

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

PB-600 series

600W Intelligent Single Output Battery Charger

FUNCTION

REMOTE CONTROL

LEAKAGE CURRENT FROM BATTERY (Typ.)

FAST CHARGE

OUTPUT OK

CHARGER OK

TEMPERATURE SENSE

Open: Normal work Short: Stop Charging

1mA

2 / 3 / 8 stage selectable

Relay contact (RY13)

Relay contact (RY15)

By NTC

POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load

EMC IMMUNITY

EMC EMISSION

BOOST CHARGE VOLTAGE Vboost

FLOAT CHARGE VOLTAGE Vfloat

UL1012

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

(for 48V only)

EN62368-1

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

(for 12V,24V only)

EN60335-1 TPTC004

File Name:PB-600-SPEC 2020-02-10

Summary of content (5 pages)

PAGE 1
PB-600 600W Intelligent Single Output Battery Charger series ■ Features : Charger for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese) (Note.1) 2/3/8 stage charging (Note 5) Built-in battery rescue function Controlled by microprocessor Universal AC input / Full range Built-in active PFC function PF>0.
PAGE 2
PB-600 600W Intelligent Single Output Battery Charger Mechanical Specification Case No.805C series Unit:mm 230 145 42.5 7 ON 33 AC INPUT ON/OFF SWITCH INLET Air flow direction 48 67 158 Stage 8/3/2 Power 1 2 3 4 5 6 7 8 9 10 OFF 9 67 24.1 ※ LED Loading Indicator Status Table Color Status Red Steady Flashing Abnormal status Orange Charging Green Full Charging ※ Control Pin No.
PAGE 3
PB-600 600W Intelligent Single Output Battery Charger series Block Diagram PFC : 95KHz PWM fosc : 60KHz ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIER & PFC RECTIFIER & FILTER POWER SWITCHING +V PFC CONTROL PWM CONTROL AUX POWER CURRENT DETECTION REVERSE DETECTION MCU 2/8 STAGE SELECT FAN REMOTE CONTROL OTP Derating Curve RC Bank OK RY13 Charger OK RY15 Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 60 50 40 0 10 20 30 40 50 60 70
PAGE 4
PB-600 600W Intelligent Single Output Battery Charger series 8 Stage Pulse Soft Start Constant Current Constant Voltage Analysis Recond Float Maintain stage 1 stage 2 stage 3 stage 4 stage 5 stage 6 stage 7 stage 8 Charge Voltage Charge Current Color of LED Loading Indicator Orange Green ◎ Suitable for lead-acid batteries (flooded, Gel and AGM). ◎ “stage 1”(Pulse) and “stage 2"(Soft Start) provide battery rescue function.
PAGE 5
PB-600 600W Intelligent Single Output Battery Charger 2.Charger OK Relay(RY15) CN100 Between pin5 and pin6(RY15) Charger series Work normally ON (Short) Failure or protection function activated OFF (Open) 1 RY13 RY13 2 Power NC Stage 8/3/2 NC RY15 RY15 1 3 5 7 9 2 4 6 8 10 GND RTH 9 + - RC- RC+ 10 RY15 Battery 3.Output OK Relay (RY13) CN100 1.