Datasheet

SPECIFICATION
PPS-200-5 PPS-200-12 PPS-200-15 PPS-200-24 PPS-200-27 PPS-200-48
MODEL
DCVOLTAGE
RATEDCURRENT
RATEDPOWER(convection)
RATEDPOWER (20.5CFMFAN)
OUTPUT
VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDTIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
PACKING
OVERLOAD
OVERVOLTAGE
OVERTEMPERATURE
ACCURRENT (Typ.)
5V 12V 15V 24V 27V 48V
36A 16.6A 13.3A 8.3A 7.4A 4.167A
0~26A
0~36A
0~12.5A
0~16.6A
0~10A
0~13.3A
0~6.25A 0~5.56A 0~3.13A
0~8.3A 0~7.4A 0~4.167A
130W
180W
150W
199.2W
150W
199.5W
150W 150W 150W
199.2W 199.8W 200W
100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
4.5~5.5V 10.8~13.2V 13.5~16.5V 21.6~26.4V 24.3~30V 43.2~52.8V
4.0% 3.0% 3.0% 2.0% 2.0% 2.0%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1200ms,60ms/230VAC2500ms,60ms/115VACatfullload
90~264VAC127~370VDC
12ms/230VAC/115VACatfullload
47~63Hz
PF>0.94/230VACPF>0.98/115VACatfullload
86% 89% 89% 89% 89% 90%
2.2A/115VAC1.2A/230VAC
COLDSTART 70A/230VAC
<2mA /240VAC
105~135% ratedoutputpower
5.6~7.25V
110
( )TSW1 Detectonheatsinkofpowertransistor
13.8~16.2V 17.25~20.25V 27.6~32.4V 31.05~36.45V 57.6~67.2V
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
UL60950-1, TUVEN60950-1 Approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,Lightindustrylevel,criteria A
-20~+70 (Refertooutputloadderatingcurve)
20~90%RHnon-condensing
-40~+85 ,10~95%RH
0.05%/ (0~50
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
108.4Khrsmin.MIL-HDBK-217F(25 )
127*76.2*34.6mm(L*W*H)
0.37Kg; 36pcs/14.3Kg/0.91CUFT
200WSingleOutputwithPFCFunction
PPS-200 se ri es
3
Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90% (typ)
Protections:Short circuit/Over load/Over voltage/
PWM control and regulated
High power density 9.78W/inch
5"x3" compact size
ZVS technology to reduce power dissipation
Free air convection for 150W and 200W with 20.5 CFM forced air
3 years warranty
Over temperature
Built-in remote sense function
Features :
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC
SAFETY &
EMC
(Note4)
PROTECTION
ENVIRONMENT
EMICONDUCTION&RADIATION
CURRENTRANGE(convection)
CURRENTRANGE(20.5CFMFAN)
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. HS1,HS2 & HS3 can not be shorted.
FileName:PPS-200-SPEC2006-07-24