Data Sheet

ManualsBrandsMean Well ManualsLED DriversLED driver Constant voltage 60 W 5 A 12 V DC dimmable, Suitable for flammable surfaces, Approved

■ Description

Constant Voltage PWM style output

with user changeable frequency up

to 4KHz compliant IEEE1789-2015

no risk

Plastic housing with class II design

Built-in active PFC function

Standby power consumption<0.5W

Integrated KNX control protocol

No need KNX-DALI gateway

Typical lifetime>50000 hours

5 years warranty

LED strip lighting

Indoor LED lighting

LED decorative lighting

LED architecture lighting

■ Features ■ Applications

File Name:PWM-60-KN-SPEC 2019-12-19

110

SELV

■ Model Encoding

-24PWM - 60

Rated output voltage(12/24V)

Rated wattage

Series name

60W PWM Output KNX LED Driver

PWM-60-KN series

Function options

Type

KNX control technology

Function Note

In stock

KNBST KNX control technology with BST14 connector

by request

Summary of content (8 pages)

PAGE 1
PWM-60-KN 60W PWM Output KNX LED Driver 110 M M series SELV ■ Features ■ Applications Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant IEEE1789-2015 no risk Plastic housing with class II design Built-in active PFC function Standby power consumption<0.
PAGE 2
PWM-60-KN 60W PWM Output KNX LED Driver series SPECIFICATION MODEL OUTPUT PWM-60-12 PWM-60-24 DC VOLTAGE 12V 24V RATED CURRENT 5A 2.5A 60W RATED POWER 60W DIMMING RANGE 0 ~ 100% PWM FREQUENCY (Typ.) 200~4000Hz user changable via ETS SETUP, RISE TIME Note.2 500ms, 80ms/ 115AC or 230VAC INPUT HOLD UP TIME (Typ.) 16ms/115VAC or 230VAC VOLTAGE RANGE Note.3 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.
PAGE 3
60W PWM Output KNX LED Driver PWM-60-KN series DIMMING OPERATION AC/L(Brown) AC/N(Blue) Vo+(Red) Vo-(Black) KNX+(Red) KNX-(Black) ※ Dimming principle for PWM style output Dimming is achieved by varying the duty cycle of the output current.
PAGE 4
60W PWM Output KNX LED Driver PWM-60-KN series ※ KNXInterface Apply KNX signal between KNX+ and KNX-. The application program(database) can be downloaded via Online Catalogs from ETS or via http://www.meanwell.com/productCatalog.
PAGE 5
PWM-60-KN 60W PWM Output KNX LED Driver series OUTPUT LOAD vs TEMPERATURE 100 80 100 80 230VAC Input only 60 60 LOAD (%) LOAD (%) 50 40 20 -35 230VAC Input only -25 -10 0 15 30 50 40 20 70 (HORIZONTAL) 60 -35 -25 0 20 45 AMBIENT TEMPERATURE,Ta (℃) 60 70 80 85 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 75℃ 1 100 0.9 90 0.8 80 0.7 0.6 115V 0.5 PF LOAD (%) 70 230V 0.4 60 277V 0.3 50 0.2 0.
PAGE 6
PWM-60-KN 60W PWM Output KNX LED Driver series LIFE TIME 120 LIFETIME(Kh) 100 80 60 40 20 0 25 35 45 55 65 75 85 Tcase( ℃ ) File Name:PWM-60-KN-SPEC 2019-12-19
PAGE 7
PWM-60-KN 60W PWM Output KNX LED Driver series Block Diagram PFC fosc : 50~120KHz PWM fosc : 60~130KHz I/P EMI FILTER & RECTIFIERS Vo+ RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT DIMMING CIRCUIT O.L.P. O.T.P. O.L.P. VoKNX+ KNX- DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. Note: PWM fosc here is not related to ouput PWM dimming Mechanical Specification Case No. PWM-60KN Unit:mm 150 5 5 300±20 300±10 Ul2464 18AWG×2C( Vo+,Vo -) 53 AC/L(Brown) AC/N(Blue) ψ4.
PAGE 8
PWM-60-KN 60W PWM Output KNX LED Driver series Recommend Mounting Direction Installation Manual ◎Connection for KNX-type Vo+(RED) AC/L(BROWN) AC/N(BLUE) Vo-(BLACK) + - LED Strip or constant voltage LED bulb KNX+(RED) Any KNX Input Device KNX-(BLACK) PWM KN series can be ETS adressing/programming WITHOUT connecting to AC mains ◎Cautions Before commencing any installation or maintenance work, please disconnect the power supply from the utility.