Datasheet

ManualsBrandsMEAN WELL ManualsPSU ComponentsAC/DC PSU module (+ enclosure) 2016 W

Industrial automation

Distributed power architecture system

Wireless/telecommunication solution

Redundant power system

Electric vehicle charger system

Constant current source system

■ Model Encoding / Order Information

■ Description

RCP-2000 is a 2KW single output rack mountable front end AC/DC power supply with a 1U low profile

and a high power density up to 25W/inch . This series operates for 90~264VAC input voltage and offers

the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in

DC fan with fan speed control, working for the temperature up to 70 . RCP-2000 provides vast design ℃

flexibility by equipping various built-in functions such as the PMBus communication protocol, output

programming, active current sharing (up to 18000W via three 19 rack shelves, RKP-1U), remote control, ”

auxiliary power, alarm signal, external control/monitor via the control model RKP-CMU1, etc.

Maximum

number that can be monitored by master controller in communication shall be 9 power supplies.

Universal AC input / Full range

(Withstand 300VAC surge input for 5 seconds)

Built-in active PFC function

High efficiency up to 92%

Forced air cooling by built-in DC fan

Output voltage programmable

Built-in OR-ing FET, support hot swap (hot plug)

Active current sharing up to 6000W for one 19 rack shelf”

Built-in I C interface, PMBus protocol

Protections: Short circuit / Overload / Over voltage /

Over temperature

Optional conformal coating

5 years warranty

■ Features

■ Applications

2000W Rack Mountable Front End Rectifier

RCP-2000 series

Output wattage

Output voltage

24RCP - -2000



Safety: UL/EN/IEC 60950-1

EMC: EN 55022 / 55024

■ Certificates

File Name:RCP-2000-SPEC 2018-08-16

※ Note 1: 19" rack shelf, RKP-1U, available. Details available on http://www.meanwell.com/

※ Note 2: Control/Monitor unit, RKP-CMU1, available. Details available on http://www.meanwell.com/

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

Dimension

295

11.6

127

41 (1U)

(1U)

inch1.61

Series name

Summary of content (6 pages)

PAGE 1
2000W Rack Mountable Front End Rectifier RCP-2000 series Dimension * W * H L 295 * 127 * 41 (1U) * 1.61 (1U) 11.6 * 5 mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.
PAGE 2
RCP-2000 2000W Rack Mountable Front End Rectifier series SPECIFICATION MODEL RCP-2000-12 RCP-2000-24 RCP-2000-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 100A 80A 42A CURRENT RANGE 0 ~ 100A 0 ~ 80A 0 ~ 42A RATED POWER 1200W 1920W 2016W 200mVp-p 300mVp-p 21 ~ 28V ±1.0% 42 ~ 56V ±1.0% RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 10.5 ~ 14V VOLTAGE TOLERANCE Note.4 ±2.0% LINE REGULATION ±1.0% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±0.5% ±0.
PAGE 3
RCP-2000 2000W Rack Mountable Front End Rectifier Block Diagram series PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC ORING FET RECTIFIERS & FILTER POWER SWITCHING +V -V -S O.V.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL DETECTION CIRCUIT ORING FET CONTROL MCU PV TRANSCEIVERS DA/DB DATA ISOLATION T-Alarm DC-OK AC-OK FAN FAIL SDA/SCL MCU O.T.P.
PAGE 4
RCP-2000 2000W Rack Mountable Front End Rectifier series Function Manual 1. Voltage Drop Compensation 1.1 Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V 14 +S RCP-2000 +V LOAD 15 -S -V -V Sense lines should be twisted in pairs 1.2 Local Sense ※ The +S,-S have to be connected to the +V(signal) ,-V (signal) , respectively, as the following diagram, in order to get the correct output voltage if Remote Sense is not used.
PAGE 5
RCP-2000 2000W Rack Mountable Front End Rectifier series 3. Remote ON-OFF Control The power supply can be turned ON/OFF together or separately by using the "Remote ON/OFF" function. Between Remote ON-OFF and +5V-AUX Power Supply Status Switch Short ON Switch Open OFF PIN17 Remote ON-OFF switch PIN29 +5V-AUX 4.PMBus Communication Interface ※ RCP-2000 supports PMBus Rev. 1.1 with maximum 100KHz bus speed, allowing information reading, status monitoring and output trimming.
PAGE 6
2000W Rack Mountable Front End Rectifier RCP-2000 Mechanical Specification Case No. 974A series Unit:mm 295 41 7.1 12.5 26.2 24 46 127 SVR1 DC OK CN501 62.4 61 3.6 5max. Air flow direction ※ LED Status Indicators & Corresponding Signal at Function Pins Function AC-OK AC-NG DC-OK DC-NG T-OK T-ALARM LED GREEN RED GREEN RED GREEN RED * Signal Power Supply Description ON 0 ~ 0.5V When input voltage≧87V 4.5 ~ 5.5V When input voltage ≦75V OFF 0 ~ 0.5V When output voltage≧80%±5% of Vo rated.