Datasheet

AMBIENT TEMPERATURE ( )℃
100
100
20
40
60
80
-40 20 30 40 50 60 70
(HORIZONTAL)
b.Operate with additional iron plate
the bottom. The size of the suggested iron plate is shown as below. In order for optimal thermal performance, the iron plate must have an even & smooth surface
and RSD-200 series must be firmly mounted at the center of the iron plate.
If it is necessary to fulfil the requirements of EN50155 TX level that operate the unit fully-loaded at 70 , RSD-200 series must be installed onto an iron plate on ℃
Suitable installation methods are shown as below. Since RSD-200 is a semi-potted model, its thermal performances for the following installation methods are similar
and share the same derating curve.
The load vs ambient temperature curve is shown as below.
Unit:mm
M4*4
iron plate
200W Railway Single Output DC-DC Converter
RSD-200
seri e s
File Name:RSD-200-SPEC 2014-10-08
Suitable installation methods are shown as below. Since RSD-200 is a semi-potted model, its thermal performances for the following installation methods are similar
and share the same derating curve.