Datasheet

SPECIFICATION
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
SAFETY STANDARDS
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
DCCURRENT (Typ.)
105~135% ratedoutputpower
Protectiontype: Constantcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
CompliancetoEN55022(CISPR22)ConductionEmission:Class A,RadiationEmission:ClassB
-40~+55 (noderating);+70 @60%loadbyfreeairconvection;+70 noderatingwithexternalbaseplate, TXclasscompliance ¢J ¢J ¢J
5~95%RHnon-condensing
-40~+85 ,5~95%RH ¢J
¡Ó ¢J ¢J 0.03%/ (0~50 )
10~500Hz,5G10min./1cycle,60min.eachalongX, Y,Zaxes;Mounting:compliancetoIEC61373
218.2Khrsmin.MIL-HDBK-217F(25 ) ¢J
191*86*40mm(L*W*H)
0.94Kg;12pcs/12.3Kg/0.8CUFT
FileName:RSD-200-SPEC 2013-01-21
200WRailwaySingleOutputDC-DCConverter
¡½
Features :
RSD-200
se ri es
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:4KVDCI/P-FG:2.5KVDCO/P-FG:2.5KVDC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH ¢J
SAFETY &
EMC
(Note4)
ENVIRONMENT
PROTECTION
1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
¢J
12V 24V 12V 24V 12V 24V
16.7A 8.4A 16.7A 8.4A 16.7A 8.4A
0~16.7A 0~8.4A 0~16.7A 0~8.4A 0~16.7A 0~8.4A
200.4W 201.6W 200.4W 201.6W 200.4W 201.6W
120mVp-p 150mVp-p 120mVp-p 150mVp-p 120mVp-p 150mVp-p
¡Ó 2.0% ¡Ó 2.0% ¡Ó 2.0% ¡Ó 2.0% ¡Ó 2.0% ¡Ó 2.0%
¡Ó 0.2% ¡Ó 0.2% ¡Ó 0.2% ¡Ó 0.2% ¡Ó 0.2% ¡Ó 0.2%
¡Ó 1.0% ¡Ó 1.0% ¡Ó 1.0% ¡Ó 1.0% ¡Ó 1.0% ¡Ó 1.0%
800ms,50msatfullload
89% 89% 91% 91% 91% 91%
9.6A/24V 9.6A/24V
45A/48VDC
4.8A/48V 4.8A/48V
45A/110VDC
2.1A/110V 2.1A/110V
45A/24VDC
¡E
¡E
¡E
¡E
¡E
Compliance to EN50155 railway standard
/ Input reverse polarity
Half encapsulated
All using 105 long life electrolytic capacitors
LED indicator for power on
100% full load burn-in test
3 years warranty
¡E ¢J
¡E
¡E
¡E
¡E
¡E
2:1 wide input range
Protections: Short circuit / Overload / Over voltage / Over temperature
4000VDC I/O isolation
¡E
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 40mm
13.8~16.2V 13.8~16.2V 13.8~16.2V27.6~32.4V 27.6~32.4V 27.6~32.4V
OVERTEMPERATURE
Protectiontype:Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
90 5 (TSW1)detecton ¢J¡Ó ¢J mainpowertransformer
48V
48V 48V
4.2A 4.2A 4.2A
0~4.2A
0~4.2A 0~4.2A
201.6W
201.6W 201.6W
180mVp-p
180mVp-p 180mVp-p
¡Ó 2.0%
¡Ó 2.0% ¡Ó 2.0%
¡Ó 0.5% ¡Ó 0.5% ¡Ó 0.5%
¡Ó 1.0% ¡Ó 1.0% ¡Ó 1.0%
89%
9.6A/24V
91% 91%
4.8A/48V 2.1A/110V
55.2~64.8V 55.2~64.8V 55.2~64.8V
HOLDUP TIME (Typ.) B/C-typecomplywithS1level@fullload,complywithS2level@70%load;D-typecomplywithS2level@fullload
EMCIMMUNITY
EMCEMISSION
VOLTAGE
RANGE
16.8~31.2VDC
14.4~33.6VDC
33.6~62.4VDC
28.8~67.2VDC
67.2~143VDC
57.6~154VDC
CONTINUOUS
1SEC.
MeetIEC60950-1(LVD)
CompliancetoEN61000-4-2,3,4,5,6,8,lightindustrylevel,criteria A
RAILWAY STANDARD
MeetEN50155/IEC60571includingIEC61373forshock&vibration,EN50121-3-2forEMC
RSD-200B-24RSD-200B-12 RSD-200C-24RSD-200C-12 RSD-200D-24 RSD-200D-12 RSD-200B-48 RSD-200C-48 RSD-200D-48
Protectiontype:Shutdowno/pvoltage,re-powerontorecover