Data Sheet

ManualsBrandsMEAN WELL ManualsPSU ComponentsAC/DC PSU module (+ enclosure) 720 W

■ Model Encoding / Order Information

■ Description

RSP-1000 is a 1KW single output enclosed type AC/DC power supply with 1U low profile. This series operates

for 90~264VAC input voltage and offers the models with the DC output mostly demanded from the industry.

Each model is cooled by the built-in fan with fan speed control, working for the temperature up to 60 . ℃,

Moreover, RSP-1000 provides vast design flexibility by equipping various built-in functions such as the

output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.

Factory control or automation apparatus

Test and measurement instrument

Laser related machine

Burn-in facility

RF application

■ Features ■ Applications

24RSP - -1000



Universal AC input / Full range

Built-in active PFC function

High efficiency up to 90%

Forced air cooling by built-in DC fan

Output voltage programmable

Active current sharing up to 4000W (3+1)

Built-in remote ON-OFF control / remote sense /

auxiliary power DC OK signal



Protections: Short circuit / Overload / Over voltage

/ Over temperature

Optional conformal coating

5 years warranty

1000W Power Supply with Single Output

RSP-1000 series

File Name:RSP-1000-SPEC 2020-03-27

Series name

Output wattage

Output voltage (12V/15V/24V/27V/48V)

Dimension

295

11.6

127

41 (1U)

(1U)

inch1.61

R33100

RoHS

CNS14336-1

UL62368-1 GB4943.1 TPTC004 IEC62368-1EN62368-1

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

Summary of content (8 pages)

PAGE 1
000W Power Supply with Single Output RSP-1000 series Dimension L * W * H 295 * 127 * 41 (1U) 11.6 * * 1.61 (1U) 5 mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g R33100 RoHS CNS14336-1 www. tuv.com ID 2000000000 EN62368-1 UL62368-1 GB4943.
PAGE 2
RSP-1000 1000W Power Supply with Single Output series SPECIFICATION MODEL RSP-1000-12 RSP-1000-15 RSP-1000-24 RSP-1000-27 RSP-1000-48 DC VOLTAGE 12V 15V 24V 27V 48V RATED CURRENT 60A 50A 40A 37A 21A CURRENT RANGE 0 ~ 60A 0 ~ 50A 0 ~ 40A 0 ~ 37A 0 ~ 21A RATED POWER 720W 750W 960W 999W 1008W 150mVp-p 150mVp-p 150mVp-p 150mVp-p 13.5 ~ 16.5V 20 ~ 26.4V 24 ~ 30V 43 ~ 55V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.
PAGE 3
RSP-1000 1000W Power Supply with Single Output series Block Diagram PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC RECTIFIERS & FILTER POWER SWITCHING -S CURRENT SHARE CURRENT SHARE O.L.P. PFC CONTROL +V -V DETECTION CIRCUIT PWM CONTROL DC OK V_TRIM O.V.P. RECTIFIERS CONTROL ON/OFF FAN AUX POWER REMOTE ON-OFF AUX POWER(5V/0.
PAGE 4
RSP-1000 1000W Power Supply with Single Output series Function Manual 1.Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V Sense lines should be twisted in pairs to minimize noise pick-up. 1 2 PIN1 +S 11 12 +V LOAD PIN10 Vca PIN2 -S +V PIN8 Vco TB1 CN50 -V -V PIN6 REMOTE ON-OFF ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal.
PAGE 5
RSP-1000 1000W Power Supply with Single Output series 4. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~110% of the nominal voltage by applying either an EXTERNAL VOLTAGE or an EXTERNAL RESISTANCE. (1)Applying EXTERNAL VOLTAGE between " Vci " (pin9) and " -S " (pin2) as shown in Fig4.
PAGE 6
RSP-1000 1000W Power Supply with Single Output series 5.Current Sharing with Remote Sense RSP-1000 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : ※The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V.
PAGE 7
RSP-1000 1000W Power Supply with Single Output Mechanical Specification Case No. 952B 277.7 Unit:mm 20.5 7.8 6 series 25.4 1 3-M4 L=6 1 1 295 21 34.5 18.5 41 2-M5 59 +V 2 127 21 CN50 Air flow direction 90 -V SVR51 12 11 10 7 3 2 1 TB1 2 3-M4 L=4 2 1 1 20.5 25.4 3-M4 L=6 7.8 1 6 277.7 ※ Mounting Instruction Chassis of RSP-1000 Mounting Surface Hole No. Recommended Screw Size 1 M4 2 M4 MAX.
PAGE 8
1000W Power Supply with Single Output RSP-1000 series ※AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment AC/N AC/L FG Diagram Maximum mounting torque 18Kgf-cm ※DC Output Terminal Pin No. Assignment Assignment Diagram +V, -V Maximum mounting torque 10Kgf-cm Installation Manual Please refer to : http://www.meanwell.com/manual.