Data Sheet

ManualsBrandsMEAN WELL ManualsPSU ComponentsAC/DC PSU module (+ enclosure) 720 W

SPECIFICATION

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT VOLTAGE ADJ. RANGE

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE

Note.4

FREQUENCY RANGE

EFFICIENCY (Typ.)

INPUT

FUNCTION

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

OVER TEMPERATURE

WORKING TEMP.

DC OK SIGNAL

AUXILIARY POWER

REMOTE ON-OFF CONTROL

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

AC CURRENT (Typ.)

300ms, 50ms at full load

16ms/230VAC 16ms/115VAC at full load

90 ~ 264VAC 127 ~ 370VDC

47 ~ 63Hz

12A/115VAC 6A/230VAC

25A/115VAC 40A/230VAC

<2.0mA / 240VAC

105 ~ 125% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

13.8 ~ 16.8V 17 ~ 20.5V 27.6 ~ 32.4V 31 ~ 36.5V 56.6 ~ 66.2V

Protection type : Shut down o/p voltage, re-power on to recover

Shut down o/p voltage, recovers automatically after temperature goes down

-20 ~ +60 (Refer to "Derating Curve")℃

Power ON : short Power OFF : open. Please refer to the Function Manual.

The TTL signal out, PSU turn on = 0 ~ 1V ; PSU turn off = 3.3 ~ 5.6V. Please refer to the Function Manual.

5V @ 0.5A (+5%, -8%)

20 ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH non-condensing℃

±℃ ℃0.02%/ (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

313.1K hrs min. Telcordia SR-332 (Bellcore) ; 116.75K hrs min. MIL-HDBK-217F (25 )℃

295*127*41mm (L*W*H)

1.95Kg; 6pcs/12.7Kg/1.15CUFT

83% 85% 88% 88% 90%

±0.5% ±0.5% ±0.5% ±0.5% ±0.5%

±1.0% ±1.0% ±1.0% ±1.0% ±1.0%

150mVp-p

10 ~ 13.5V

150mVp-p

13.5 ~ 16.5V

150mVp-p

20 ~ 26.4V

150mVp-p

24 ~ 30V

150mVp-p

43 ~ 55V

12V

60A

0 ~ 60A

720W

15V

50A

0 ~ 50A

750W

24V

40A

0 ~ 40A

960W

27V

37A

0 ~ 37A

999W

48V

21A

0 ~ 21A

1008W

RSP-1000-12 RSP-1000-15 RSP-1000-24 RSP-1000-27 RSP-1000-48

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltages. Please check the derating curve for more details.

5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to

perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load

SAFETY STANDARDS

UL62368-1, CSA C22.2 , TUV EN62368-1, EAC TP TC 004, CCC GB4943.1 approved

, BSMI CNS14336-1No. 62368-1

RIPPLE & NOISE (max.) Note.2

VOLTAGE TOLERANCE Note.3

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

ENVIRONMENT

SAFETY &

EMC

(Note 5)

PROTECTION

1000W Power Supply with Single Output

RSP-1000 series

File Name:RSP-1000-SPEC 2020-03-27

Parameter

ESD

Radiated

EFT / Burst

Surge

Conducted

Magnetic Field

Voltage Dips and Interruptions

Conducted

Radiated

Harmonic Current

Voltage Flicker

Standard

EN55032 (CISPR32)

EN61000-3-2

EN61000-3-3

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

EN61000-4-8

EN61000-4-11

Test Level / Note

Level 3, 8KV air ; Level 2, 4KV contact

Level 3

Level 4

>95% dip 0.5 periods, 30% dip 25 peniods,

>95% interruptions 250 periods

Class B

Class A

-----

EMC IMMUNITY

EMC EMISSION

Adjustment of output voltage is allowable to 40 ~ 110% of nominal output voltage. Please refer to the Function Manual.

OUTPUT VOLTAGE PROGRAMMABLE(PV)

En55024 , EN61204-3, EN61000-6-2, , ,CCC GB17625.1 GB/T9254 BSMI CNS13438

CURRENT SHARING

Up to 4000W or (3+1) units. Please refer to the Function Manual.

REMOTE SENSE

Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual.

Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line